Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

2004

«
1
…
6
7
8
9
10
11
12
…
17
»

DSTU GOST ISO 8178-7:2004

Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination

DSTU GOST ISO 8178-8:2004

Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination

DSTU GOST ISO 8380:2004

Forestry machines. Brush cutters and scythes benzomotor. Test methods for the protective device of the cutting body for strength (GOST ISO 8380-2002, IDT)

DSTU IEC 60050-604:2004

International Electrotechnical Vocabulary. Chapter 604: Generation, transmission and distribution of electricity - Operation

DSTU IEC 60051-1:2004

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

DSTU IEC 60051-4:2004

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4: Special requirements for frequency meters

DSTU IEC 60065:2004

Audio, video and similar electronic apparatus - Safety requirements

DSTU IEC 60173:2004

Colours of the cores of flexible cables and cords

DSTU IEC 60227-3:2004

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

DSTU IEC 60227-4:2004

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

DSTU IEC 60227-5:2004

olyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)

DSTU IEC 60245-1:2004

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

DSTU IEC 60245-3:2004

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

DSTU IEC 60335-1:2004

This Test Report Form applies to IEC 60335-1:2001 (incl. Corrigendum 1:2002) + A1:2004

DSTU IEC 60335-2-17:2004

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances

DSTU IEC 60335-2-21:2004

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

DSTU IEC 60335-2-30:2004

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

DSTU IEC 60335-2-35:2004

Household and similar electrical appliances. Security. Part 2-35. Additional requirements for instantaneous water heaters

DSTU IEC 60335-2-41:2004

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

DSTU IEC 60335-2-80:2004

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

DSTU IEC 60412:2004

Barrel thread for lampholders with shade holder ring

DSTU IEC 60519-4:2004

Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations

DSTU IEC 60523:2004

Direct-current potentiometers

DSTU IEC 60564:2004

D.C. bridges for measuring resistance

DSTU IEC 60687:2004

Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements

Price: $1,457.40

DSTU IEC 60730-2-4:2004

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

DSTU IEC 60730-2-9:2004

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

DSTU IEC 60804:2004

Integrating-averaging sound level meters

DSTU IEC 60810:2004

Lamps for road vehicles

DSTU IEC 60811-1-1:2004

Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

DSTU IEC 60811-1-2:2004

Common test methods for insulating and sheathing materials of electric cables

DSTU IEC 60811-1-4:2004

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature

DSTU IEC 60811-2-1:2004

Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests

DSTU IEC 60811-3-1:2004

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking

DSTU IEC 60811-3-2:2004

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test - Thermal stability test

DSTU IEC 60825-1:2004

Safety of laser products - Part 1: Equipment classification and requirements

DSTU IEC 60831-1:2004

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation

DSTU IEC 60831-2:2004

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test

DSTU IEC 60947-4-2:2004

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

DSTU IEC 60947-6-2:2004

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

DSTU IEC 60974-6:2004

Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources

DSTU IEC 61000-3-2:2004

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase)

DSTU IEC 61000-6-2:2004

Electromagnetic compatibility. Part 6-2. Immunity of industrial equipment to interference. General technical requirements

DSTU IEC 61028:2004

Electrical measuring instruments - X-Y recorders

DSTU IEC 61242:2004

Electrical accessories - Cable reels for household and similar purposes

DSTU IEC 61557-1:2004

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

DSTU IEC 61557-6:2004

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems

DSTU IEC 61770:2004

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets

«
1
…
6
7
8
9
10
11
12
…
17
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!