Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
5
6
7
8
9
10
11
…
25
»

DSTU EN 1624:2018

Textiles and textile products. Flammability. Textiles, technical and industrial. Method for determining flame propagation in vertically located samples

DSTU EN 1625:2018

Textiles and textile products. Flammability. Textiles, technical and industrial. Method for determining flammability on vertically located samples

DSTU EN 16252:2018 (EN 16252:2012, IDT)

Machines for compacting waste and fractions for recycling. Horizontal baling presses. Safety requirements

DSTU EN 16296:2018

Defects in welded joints of thermoplastics. quality levels

DSTU EN 16307-1:2018 (EN 16307-1:2013 + A1:2015, IDT)

Industrial freight transport. Security and verification requirements. Part 1. Additional safety requirements for industrial self-propelled machines, except for self-propelled trucks, stackers with different ranges, cargo trucks

DSTU EN 16307-5:2018

Industrial freight transport. Security requirements and checks. Part 5. Additional requirements for transport controlled by a foot operator

DSTU EN 16307-6:2018

Industrial freight transport. Security requirements and checks. Part 6. Additional transport requirements for the transport of goods and personnel

DSTU EN 16327:2018

Fire fighting. Pressure Foam Mixers (PPPS) and Compression Foam Fire Extinguishing Systems (CAFS)

DSTU EN 16361:2018

Mechanized doors for pedestrians. Product standard, performance. Door blocks, except for rotary ones, designed for installation with a mechanized drive without characteristics of fire resistance and dimness

DSTU EN 16442:2018 (EN 16442:2015, IDT)

Cabinet with controlled storage conditions for heat-sensitive endoscopes

DSTU EN 16474:2018

Equipment for the production of plastic and rubber products. Production plants for tire tire vulcanization. Safety requirements

DSTU EN 16590-1:2018

Agricultural and forestry tractors and machines. Security related parts of control systems. Part 1. General principles of design and development

DSTU EN 16590-2:2018

Agricultural and forestry tractors and machines. Security related parts of control systems. Part 2. Stage of concept development

DSTU EN 16590-3:2018 (EN 16590-3:2014, IDT; ISO 25119-3:2010, MOD)

Agricultural and forestry tractors and machines. Safety-related parts of control systems. Part 3. Serial development, hardware and software

DSTU EN 16590-4:2018

Agricultural and forestry tractors and machines. Security related parts of control systems. Part 4. Requirements for the manufacture, operation, modification and auxiliary processes

DSTU EN 16714-1:2018 (EN 16714-1:2016, IDT)

Unbrakable control. Part 1. Thermographic control. general principles

DSTU EN 16714-2:2018 (EN 16714-2:2016, IDT)

Unbrakable control. Part 2. Thermographic control. equipment

DSTU EN 16714-3:2018 (EN 16714-3:2016, IDT)

Unbrakable control. Part 3. Thermographic control. Terms and Definitions

DSTU EN 16732:2018 (EN 16732:2014, IDT)

Zippers. Technical conditions

DSTU EN 1734:2018

Fabrics with rubber or plastic coating. Determination of resistance to water penetration. Low pressure method

DSTU EN 1735:2018

Fabrics with rubber or plastic coating. definition of flexibility

DSTU EN 1756-1:2018 (EN 1756-1:2001 + A1:2008, IDT)

Rear lifts. Platform lifting for installation on wheeled vehicles. Safety requirements. Part 1. Lifts for piece goods

DSTU EN 1756-2:2018 (EN 1756-2:2004 + A1:2009, IDT)

Rear lifts. Platform lifting for installation on wheeled vehicles. Safety requirements. Part 2. Lifts for passengers

DSTU EN 1845:2018

Machines for the manufacture of shoes, leather goods and leatherette. Shoe shaping machines. Safety requirements

DSTU EN 1846-2:2018

Fire rescue vehicles. Part 2. General requirements. Safety and performance

DSTU EN 1846-3:2018

Fire rescue vehicles. Part 3. Fixed equipment installed. Safety and performance

DSTU EN 1870-10:2018

Safety of woodworking machines. Kruglopilny machines. Part 10. Single-automatic and semi-automatic cross-cutting machines

DSTU EN 1870-11:2018

Safety of woodworking machines. Kruglopilny machines. Part 11. Semi-automatic and automatic horizontal cross-saw machines with one saw mechanism

DSTU EN 1870-12:2018

Safety of woodworking machines. Kruglopilny machines. Part 12. Power-feed torquing machines

DSTU EN 1870-13:2018

Safety of woodworking machines. Kruglopilny machines. Part 13. Horizontal machines for cutting plates

DSTU EN 1870-14:2018

Safety of woodworking machines. Kruglopilny machines. Part 14. Vertical machines for trimming plates

DSTU EN 1870-16:2018

Safety of woodworking machines. Kruglopilny machines. Part 16. Double-sided cutting machines for V-cutting

DSTU EN 1870-17:2018

Safety of woodworking machines. Kruglopilny machines. Part 17. Machine tools horizontal odnopilkov and cross-saw with manual control (radial saws)

DSTU EN 1870-18:2018 (EN 1870-18:2013, IDT)

Safety woodworking machines. Circular sawing machines. Part 18. Saws

DSTU EN 1870-19:2018

Safety of woodworking machines. Kruglopilny machines. Part 19. Machine tools with or without a mobile table and saws for construction sites

DSTU EN 1870-4:2018

Safety of woodworking machines. Kruglopilny machines. Part 4. Multi-blade longitudinal sawing machines with manual loading and

DSTU EN 1870-5:2018

Safety of woodworking machines. Circular saw machines. Part 5. Circular-sawing machines / cross-cutting machines upwards

DSTU EN 1870-6:2018

Safety of woodworking machines. Kruglopilny machines. Part 6. Firewood sawmills and dual-purpose machines: firewood sawmill and typesetting machines, with manual loading and

DSTU EN 1870-7:2018

Safety of woodworking machines. Kruglopilny machines. Part 7. Single-disc log machines with an integrated table feed mechanism and manual loading and

DSTU EN 1870-8:2018

Safety of woodworking machines. Kruglopilny machines. Part 8. Single-disk edge-cutting machines with a power drive of the saw mechanism and manual loading and

DSTU EN 1870-9:2018 (EN 1870-9:2012, IDT)

Safety woodworking machines. Circular sawing machines. Part 9. Circular saws for lateral cutting with mechanical feed and manual loading and

DSTU EN 1875-3:2018

Fabrics with rubber or plastic coating. Determination of resistance to torment. Part 3. Trapezoidal method

DSTU EN 1876-1:2018

Fabrics with rubber or plastic coating. Tests at low temperatures. Part 1. Bending tests

DSTU EN 1876-2:2018

Fabrics with rubber or plastic coating. Tests at low temperatures. Part 2. Impact Test

DSTU EN 1927-1:2018 (EN 1927-1:2008, IDT)

Round coniferous timber. Classification by quality. Part 1. Spruce and fir

DSTU EN 1927-2:2018 (EN 1927-2:2008, IDT)

Round coniferous timber. Classification by quality. Part 2. Pine

DSTU EN 1927-3:2018 (EN 1927-3:2008, IDT)

Round coniferous timber. Classification by quality. Part 3. Larch and thousands

DSTU EN 1953:2018 (EN 1953:2013, IDT)

Coating and spraying equipment. Safety requirements

«
1
…
5
6
7
8
9
10
11
…
25
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!