Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU IEC 61000-4-7:2012
DSTU IEC 61000-4-7:2012
Electromagnetic compatibility. Part 4-7. Testing and measurement procedures. General installation for measuring harmonics and interharmonics from general-purpose power supply systems and auxiliary equipment
DSTU IEC 61000-5-5:2012
DSTU IEC 61000-5-5:2012
Electromagnetic Compatibility. Part 5-5. Recommendations for the installation of equipment and noise reduction. Specifications for protection devices from conducted interference caused by an electromagnetic pulse of a high-altitude nuclear explosion. Basi
DSTU IEC 61000-6-6:2012
DSTU IEC 61000-6-6:2012
Electromagnetic compatibility. Part 6-6. Generic standards. The immunity of equipment indoors to the electromagnetic pulse of a high-altitude nuclear explosion
DSTU IEC 61104:2012
DSTU IEC 61104:2012
Video system on CD, 12 cm CD-V
DSTU IEC 61121:2012
DSTU IEC 61121:2012
Dryer-type appliances for domestic use. Functional Measurement Methods
DSTU IEC 61817:2012
DSTU IEC 61817:2012
Portable household appliances for cooking and grilling. Functional Measurement Methods
DSTU IEC 61970-1:2012
DSTU IEC 61970-1:2012
Application Interface in Electricity Management Systems (EMS-API). Part 1. Guidelines and basic requirements (IEC 61970-1: 2005, IDT)
DSTU IEC 62052-11:2012
DSTU IEC 62052-11:2012
Means of measuring electrical energy of alternating current. General requirements, tests and test conditions. Part 11. Electricity meters
DSTU IEC 62053-11:2012
DSTU IEC 62053-11:2012
Means for measuring the electrical energy of alternating current. Special requirements. Part 11. Electromechanical active energy meters (accuracy classes 0.5; 1 and 2) (IEC 62053-11: 2003, IDT)
DSTU IEC 62053-21:2012
DSTU IEC 62053-21:2012
Means for measuring the electrical energy of alternating current. Special requirements. Part 21. Static active energy meters (accuracy classes 1 and 2) (IEC 62053-21: 2003, IDT)
DSTU IEC 62053-23:2012
DSTU IEC 62053-23:2012
Means for measuring the electrical energy of alternating current. Special requirements. Part 23. Static reactive energy meters (accuracy classes 2 and 3) (IEC 62053-23: 2003, IDT)
DSTU IEC 62305-2:2012
DSTU IEC 62305-2:2012
Lightning protection. Part 2. Risk management (IEC 62305-2: 2010, IDT)
DSTU IEC 62384:2012
DSTU IEC 62384:2012
Electronic devices for supplying light emitting diode modules from direct or alternating voltage sources. Performance Requirements
DSTU IEC 62552:2012
DSTU IEC 62552:2012
Household refrigerating appliances. Functional characteristics and test methods
DSTU IEC 62560:2012
DSTU IEC 62560:2012
LED lamps for general lighting with a voltage of more than 50 V in combination with auxiliary devices. Safety requirements
DSTU IEC/PAS 62612:2012
DSTU IEC/PAS 62612:2012
LED lamps of general lighting in combination with auxiliary devices. Performance requirements (IEC/PAS 62612: 2009, IDT)
DSTU IEC/TR 61000-1-3:2012
DSTU IEC/TR 61000-1-3:2012
Electromagnetic compatibility. Part 1-3. General Provisions The effect of the electromagnetic pulse of a high-altitude nuclear explosion on equipment and systems for civilian purposes
DSTU IEC/TR 61000-1-4:2012
DSTU IEC/TR 61000-1-4:2012
Electromagnetic compatibility. Part 1-4. General Provisions Justification for limiting the level of emission of conductive harmonic currents of industrial frequency from equipment in the frequency range up to 2 kHz
DSTU IEC/TR 61000-1-5:2012
DSTU IEC/TR 61000-1-5:2012
Electromagnetic compatibility. Part 1-5. General Provisions The effect of the electromagnetic pulse of a high-altitude nuclear explosion on civilian systems
DSTU IEC/TR 61000-2-14:2012
DSTU IEC/TR 61000-2-14:2012
Electromagnetic Compatibility. Part 2-14. Electromagnetic environment. Overvoltage in general purpose electrical distribution networks (IEC/TR 61000-2-14: 2006, IDT)
DSTU IEC/TR 61000-2-5:2012
DSTU IEC/TR 61000-2-5:2012
Electromagnetic compatibility. Part 2-5. Electromagnetic environment. Description and classification of electromagnetic environment
DSTU IEC/TR 61000-2-8:2012
DSTU IEC/TR 61000-2-8:2012
Electromagnetic compatibility. Part 2-8. Electromagnetic environment. Results of statistical measurement of voltage dips and short-term interruptions in general-purpose power supply systems
DSTU IEC/TR 61000-3-6:2012
DSTU IEC/TR 61000-3-6:2012
Electromagnetic compatibility. Part 3-6. Estimation of emission standards for connecting disturbing installations to medium, high and ultra-high voltage power supply systems
DSTU IEC/TR 61000-3-7:2012
DSTU IEC/TR 61000-3-7:2012
Electromagnetic compatibility. Part 3-7. Estimation of emission standards for connecting fluctuation plants to power supply systems of medium, high and extra high voltage
DSTU IEC/TR 61000-5-3:2012
DSTU IEC/TR 61000-5-3:2012
Electromagnetic compatibility. Part 5-3. Hardware Installation Guide and Interference Suppression. The concept of protection against the electromagnetic pulse of a high-altitude nuclear explosion
DSTU IEC/TR 61000-5-6:2012
DSTU IEC/TR 61000-5-6:2012
Electromagnetic compatibility. Part 5-6. Hardware Installation Guide and Interference Suppression. Decrease in external electromagnetic influence
DSTU IEC/TS 61000-1-2:2012
DSTU IEC/TS 61000-1-2:2012
Electromagnetic compatibility. Part 1-2. General Provisions Methodology for achieving the functional safety of electrical and electronic systems, including equipment sensitive to electromagnetic phenomena
DSTU IEC/TS 61000-5-4:2012
DSTU IEC/TS 61000-5-4:2012
Electromagnetic Compatibility. Part 5-4. Recommendations for the installation of equipment and noise reduction. Immunity to the electromagnetic pulse of a high-altitude nuclear explosion. Specifications for protection devices from radiated interference ca
DSTU ISO 10840:2012
DSTU ISO 10840:2012
Plastics. Guidance on the use of type fire tests (ISO 10840: 2008, IDT)
DSTU ISO 11094:2012
DSTU ISO 11094:2012
Acoustics. Drive lawn mowers, lawn tractors, lawn and garden tractors, mowers for professional use, lawn and garden tractors with mowing devices. Methods of measuring noise in the air
DSTU ISO 11285:2004/IDF 175:2012
DSTU ISO 11285:2004/IDF 175:2012
Milk. Enzymatic determination of lactulose content (ISO 11285: 2004 (IDF 175: 2004), IDT)
DSTU ISO 11681-2:2012
DSTU ISO 11681-2:2012
Forestry machines. Portable chain saws. Safety and control requirements. Part 2. Saws for tree care
DSTU ISO 11713:2012
DSTU ISO 11713:2012
Carbonaceous materials for aluminum production. Cathode blocks and burned out anodes. Method for determination of electrical resistivity at ambient temperature (ISO 11713: 2000, IDT)
DSTU ISO 11784:2012
DSTU ISO 11784:2012
Identification of animals by radio frequency code. Code structure (ISO 11784: 1996/Amd 1: 2004), IDT
DSTU ISO 11785:2012
DSTU ISO 11785:2012
Identification of animals by radio frequency code. Technical principle (ISO 11785: 1996, IDT)
DSTU ISO 11788-1:2012
DSTU ISO 11788-1:2012
Electronic data interchange between information systems in agriculture. Dictionary of elements of agricultural data. Part 1. General description (ISO 11788-1: 1997, IDT)
DSTU ISO 12003-1:2012
DSTU ISO 12003-1:2012
Agricultural and forestry tractors. Protective structures for narrow-gauge wheeled tractors. Part 1. Front-mounted protective structures in case of tipping over
DSTU ISO 12003-2:2012
DSTU ISO 12003-2:2012
Agricultural and forestry tractors. Protective structures for narrow-gauge wheeled tractors. Part 2. Rear-end protective structures in case of capsizing
DSTU ISO 12151-2:2012
DSTU ISO 12151-2:2012
Connection for volumetric hydraulic actuators and general applications. Part 2. Connectors for sleeves with 24 ° conical joints articulated with ends and o-rings in accordance with ISO 8434-1 and ISO 8434-4
DSTU ISO 12151-4:2012
DSTU ISO 12151-4:2012
Connection for volumetric hydraulic actuators and general applications. Part 4. Hose connectors with metric threaded ends according to ISO 6149. Specifications
DSTU ISO 12151-5:2012
DSTU ISO 12151-5:2012
Connection for volumetric hydraulic actuators and general applications. Part 5. Sleeve connectors with ends rolled at an angle of 37 ° to ISO 8434-2
DSTU ISO 12937:2012
DSTU ISO 12937:2012
Oil products. Determination of water by the Karl Fischer coulometric titration method (ISO 12937: 2000, IDT)
DSTU ISO 12987:2012
DSTU ISO 12987:2012
Carbonaceous materials for aluminum production. Anodes, cathode blocks, side blocks and burned ramming masses. Comparative method for determining thermal conductivity (ISO 12987: 2004, IDT)
DSTU ISO 13441-2:2012
DSTU ISO 13441-2:2012
Pneumatic agricultural sprayers. Technical data cards. Part 2. Requirements for components
DSTU ISO 13571:2012
DSTU ISO 13571:2012
Fire Hazards. Guidelines for estimating the time required for evacuation, based on data on fires (ISO 13571: 2007, IDT)
DSTU ISO 13628-3:2012
DSTU ISO 13628-3:2012
Oil and gas industry. Design and operation of subsea production systems. Part 3. Exhaust piping systems (LDPE) (ISO 13628-3: 2000, IDT)
DSTU ISO 13772:2012
DSTU ISO 13772:2012
Forestry machines. Portable chain saws. Auto brake circuit test methods
DSTU ISO 14644-4:2012
DSTU ISO 14644-4:2012
Cleanrooms and associated controlled environments. Part 4. Design, construction and commissioning (ISO 14644-4: 2001, IDT)

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!