Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
4
5
6
7
8
9
10
…
15
»

DSTU EN 13015:2013

Maintenance of elevators and escalators. Standards for maintenance instructions (EN 13015: 2001 A1: 2008, IDT)

DSTU EN 13053:2013

Ventilation and air conditioning systems. Central air conditioners. Nominal and performance characteristics of components and sections (EN 13053: 2006, IDT)

DSTU EN 13059:2013

Industrial loader safety. Test methods for measuring vibration (EN 13059: 2002 A1: 2008, IDT)

DSTU EN 13067:2013

Personnel performing plastic welding. Qualification tests of welders. Welded Thermoplastic Structures

DSTU EN 13241-1:2013

Doors and gates of industrial, retail and garage spaces. Product standard. Part 1. Technical requirements for products other than fire and smoke protection requirements (EN 13241-1: 2003 A1: 2011, IDT)

DSTU EN 13278:2013

Autonomous gas heaters with open front. General technical requirements and test methods

DSTU EN 13406:2013

Agricultural machines. Agricultural equipment. Tanks and spraying devices for liquid organic fertilizers. Environmental requirements and spray test methods

DSTU EN 13490:2013

Mechanical vibration. Industrial loaders. Laboratory examination and special requirements for the operator's seat (EN 13490: 2001 A1: 2008, IDT)

DSTU EN 13599:2013

Copper and copper alloys. Copper plate, sheet and tape for electrical purposes. Specifications (EN 13599: 2002, IDT)

DSTU EN 13631-12:2013

Explosives for civilian use. Substances explosive blasting. Part 12. Technical requirements for intermediate detonators with different initiating capabilities (EN 13631-12: 2004, IDT)

DSTU EN 13631-16:2013

Explosives for civilian use. Substances explosive blasting. Part 16. Detection and measurement of toxic gases (EN 13631-16: 2004, IDT)

DSTU EN 13763-23:2013

Explosives for civilian use. Detonators and relays. Part 23. Determination of the velocity of a shock wave in a shock tube (EN 13631-23: 2002, IDT)

DSTU EN 13763-24:2013

Explosives for civilian use. Detonators and relays. Part 24. Determination of the electrical insulation resistance of a shock tube (EN 13631-24: 2002, IDT)

DSTU EN 13763-25:2013

Explosives for civilian use. Detonators and relays. Part 25. Determination of the transfer ability of surface connectors, relays and connecting accessories (EN 13631-25: 2004, IDT)

DSTU EN 13763-26:2013

Explosives for civilian use. Detonators and relays. Part 26. Terms and definitions, test methods and device requirements and accessories for reliable and safe operation of detonators and relays (EN 13631-26: 2004, IDT)

DSTU EN 13771-1:2013

Compressors and condensers for cooling. Test methods with performance checks. Part 1. Cooling compressors (EN 13771-1: 2003, IDT)

DSTU EN 13771-2:2013

Compressors and condensers for cooling. Test methods with performance checks. Part 2. Condensing unit (EN 13771-2: 2007, IDT)

DSTU EN 13836:2013

Gas central heating boilers. Type B boilers with a rated heat output of more than 300 kW, but less than 1000 kW. General technical requirements and test methods

DSTU EN 13938-1:2013

Explosives for civilian use. Fuels and rocket fuels. Part 1. Requirements (EN 13938-1: 2004, IDT)

DSTU EN 14459:2013

Control systems for gas burners i gas-electronic devices electronic. Classifications and assessment methods (EN 14459: 2007, IDT EN 14459: 2007/AC: 2009, IDT)

DSTU EN 14466:2013

Fire fighting equipment. Motor-pomp fire portable. General technical requirements, safety requirements and test methods (EN 14466: 2005 A1: 2008, IDT)

DSTU EN 14543:2013

Devices running on liquefied petroleum gas. Umbrella heaters emitting without exhaust gases for use outdoors or in places with adequate ventilation. Technical specifications

DSTU EN 14588:2013

Solid biofuels. Terms and Definitions

DSTU EN 14678-2:2013

Equipment for liquefied petroleum gas. Equipment gas stations. Part 2. Components other than dispensers and installation requirements (ISO 14678-2: 2007, IDT)

DSTU EN 14774-1:2013

Solid biofuel. Determination of moisture content. Drying method in the oven. Part 1. The total moisture. Standard method (EN 14774-1: 2009, IDT)

DSTU EN 14774-2:2013

Solid biofuel. Determination of moisture content. Drying method in the oven. Part 2. The total moisture. Simplified method (EN 14774-2: 2009, IDT)

DSTU EN 14774-3:2013

Solid biofuel. Determination of moisture content. Drying method in the oven. Part 3. Moisture in the sample for general analysis (EN 14774-3: 2009, IDT)

DSTU EN 14778:2013

Solid biofuels. Sample selection

DSTU EN 1482-2:2013

Fertilizers and limestone materials. Sampling and sample preparation. Part 2. Sample preparation (EN 1482-2: 2007, IDT)

DSTU EN 1483:2013

Water quality. Determination of mercury content by atomic absorption spectrometry (EN 1483: 2007, IDT)

DSTU EN 1493:2013

Lifts for vehicles. Safety requirements (EN 1493: 1998 A1: 2008, IDT)

DSTU EN 14930:2013

Agricultural and forestry machines and garden equipment controlled by a foot operator and manual. Hot Surface Accessibility Method

DSTU EN 15033:2013

Domestic liquefied gas water heaters with a closed combustion chamber installed on vehicles and boats. General technical requirements and test methods

DSTU EN 15103:2013

Solid biofuels. Methods for determining bulk density

DSTU EN 15104:2013

Solid biofuel. Methods for the determination of total carbon, hydrogen and nitrogen (EN 15104: 2011, IDT)

DSTU EN 15105:2013

Solid biofuels. Methods for determining the content of water-soluble chlorides, sodium and potassium

DSTU EN 15149-1:2013

Solid biofuels. Methods for the determination of particle size distribution. Part 1. Method using a vibrating sieve with holes of 1 mm or more

DSTU EN 15149-2:2013

Solid biofuels. Methods for the determination of particle size distribution. Part 2. Using a vibrating sieve with holes of 3.15 mm or less

DSTU EN 15210-1:2013

Solid biofuels. Method for determining the mechanical strength of pellets and briquettes. Part 1. Pellets

DSTU EN 15210-2:2013

Solid biofuels. Method for determining the mechanical strength of pellets and briquettes. Part 2. Briquettes

DSTU EN 15234-1:2013

Solid biofuels. Quality assurance. Part 1. General requirements (EN 15234-1: 2011, IDT)

DSTU EN 15234-2:2013

Solid biofuels. Quality assurance. Part 2. Wood pellets for non-industrial use

DSTU EN 15234-3:2013

Solid biofuels. Quality assurance. Part 3. Wood briquettes for non-industrial use

DSTU EN 15234-4:2013

Solid biofuel. Quality assurance. Part 4. Wood chips for non-industrial use (EN 15234-4: 2012, IDT)

DSTU EN 15289:2013

Solid biofuel. Methods for determining total sulfur and chlorine (EN 15289: 2011, IDT)

DSTU EN 1570:2013

Lifting equipment. Lifting platforms. Safety requirements (EN 1570: 1998 A2: 2009, IDT)

DSTU EN 1889-2:2013

Underground mining machines. Underground self-propelled cars. Security. Part 2. Rail locomotives (EN 1889-2: 2003 A1: 2009, IDT)

DSTU EN 1900:2013

Materials and products in contact with food. Non-metallic tableware. glossary of terms

«
1
…
4
5
6
7
8
9
10
…
15
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!