Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
3
4
5
6
7
8
9
…
12
»

DSTU EN 13971:2012

Carbonate vapnuvalni materials. Determination of reactivity. Method for potentiometric titration with hydrochloric acid (EN 13971: 2008, IDT)

DSTU EN 14045:2012

Packaging. Evaluation of the decomposition of packaging materials in practically oriented tests under certain conditions of composting (EN 14045: 2003, IDT)

DSTU EN 14069:2012

Limestone materials. Description and minimum requirements (EN 14069: 2003, IDT)

DSTU EN 14182:2012

Packaging. Basic terms and definitions (EN 14182: 2002, IDT)

DSTU EN 14331:2012

Oil products liquid. Isolation and determination of fatty acid methyl esters (FAME) of middle distillates. Liquid chromatography (PX)/ gas chromatography (GC) method (EN 14331: 2004, IDT)

DSTU EN 14370:2012

Substances are surface-active. Methods for determining surface tension (EN 14370: 2004, IDT)

DSTU EN 14438:2012

Gas installations for heating more than one room. General technical requirements and test methods

DSTU EN 14666:2012

Substances surface-active. Determination of tetraacetylethylenediamine (TAED) in TAED granules by gas chromatography (EN 14666: 2005, IDT)

DSTU EN 14667:2012

Substances surface-active. Determination of low-boiling solvents in liquid compositions by gas chromatography (EN 14667: 2005, IDT)

DSTU EN 14668:2012

Substances surface-active. Determination of surface-active quaternary ammonium in raw materials and finished products using potentiometric two-phase titration (EN 14668: 2005, IDT)

DSTU EN 14973:2012

Conveyor belts for underground equipment. Electrical and fire safety requirements (EN 14973: 2006 A1: 2008, IDT)

DSTU EN 15099-1:2012

Irrigation equipment. Remote monitoring and control of irrigation systems. Part 1. General Provisions

DSTU EN 15109:2012

Substances surface-active. Method for determining the content of the active substance alkyldipropyl betainein (EN 15109: 2006, IDT)

DSTU EN 15148:2012

Solid biofuel. Method for determination of volatile matter content (EN 15148: 2009, IDT)

DSTU EN 15469:2012

Oil products. Method for determination of free water in liquefied petroleum gases by visual inspection (EN 15469: 2007, IDT)

DSTU EN 15470:2012

Liquefied petroleum gas. Determination of dissolved residues by high temperature gas chromatography (EN 15470: 2007, IDT)

DSTU EN 1554:2012

Conveyor belts. Friction tests on the drum (EN 1554: 1998, IDT)

DSTU EN 203-2-10:2012

Gas heating equipment for catering. Part 2-10. Special requirements. Bulk Grill (EN 203-2-10: 2007, IDT)

DSTU EN 203-2-7:2012

Gas heating equipment for catering. Part 2-7. Special requirements. Spit broilers and grills

DSTU EN 24260:2012

Petroleum products and hydrocarbons. Determination of sulfur content by the Wickold method of combustion (EN 24260: 1994, IDT)

DSTU EN 473:2012

NDT. Qualification and certification of personnel. Basic provisions (EN 473: 2008, IDT)

DSTU EN 50106:2012

Safety of household and similar electrical appliances. Separate rules for acceptance testing of instruments, the scope of EN 60335-1 (EN 50106: 2008, IDT)

DSTU EN 50131-2-2:2012

Alarm systems. Alarm systems. Part 2-2. Passive infrared security detectors

DSTU EN 50131-2-4:2012

Alarm systems. Alarm systems. Part 2-4. Requirements for combined passive infrared and microwave detectors

DSTU EN 50131-2-6:2012

Alarm Systems. Part 2-6. Magnetic contact detectors (EN 50131-2-6: 2008, IDT)

DSTU EN 50131-6:2012

Alarm systems. Alarm systems. Part 6. Power Supplies

DSTU EN 50133-2-1:2012

Alarm Systems. Access control systems for security purposes. Part 2-1. General requirements for component systems (EN 50133-2-1: 2000, IDT)

DSTU EN 54-16:2012

Fire alarm systems. Part 16. Voice alarm control and indication equipment (EN 54-16: 2008, IDT)

DSTU EN 54-24:2012

Fire Alarm Systems. Part 24. Components of voice alarm systems. Loudspeakers (EN 54-24: 2008, IDT)

DSTU EN 61000-2-10:2012

Electromagnetic compatibility. Part 2-10. Electromagnetic environment. Description of the electromagnetic environment relative to the electromagnetic pulse of a high-altitude nuclear explosion. conducted interference

DSTU EN 61000-2-2:2012

Electromagnetic compatibility. Part 2-2. Electromagnetic environment. Compatibility Levels for Low Frequency Conducting Interference and Signaling System Signals in Low Voltage General Purpose Power Systems

DSTU EN 61000-2-4:2012

Electromagnetic compatibility. Part 2-4. Electromagnetic environment. Industrial Frequency Interference Levels

DSTU EN 61000-2-9:2012

Electromagnetic Compatibility. Part 2-9. Electromagnetic environment. Description of the electromagnetic environment relative to the electromagnetic pulse of a high-altitude nuclear explosion. Radiated disturbances. Basic EMC publication (EN 61000-2-9: 19

DSTU EN 61000-3-3:2012

Electromagnetic compatibility. Part 3-3. Norms at the level of voltage and flicker fluctuations in low-voltage power supply systems for equipment with a rated current of up to 16 A per phase, not intended for connection under certain conditions

DSTU EN 61000-4-12:2012

Electromagnetic compatibility. Part 4-12. Testing and measurement procedures. Immunity test for non-repetitives will fade away oscillating transients

DSTU EN 61000-4-21:2012

Electromagnetic compatibility. Part 4-21. Test methods and measurements in reverberation chambers

DSTU EN 61000-4-23:2012

Electromagnetic compatibility. Part 4-23. Testing and measurement procedures. Test methods for protection devices against the electromagnetic pulse of a high-altitude nuclear explosion and other emitted disturbances

DSTU EN 61000-4-24:2012

Electromagnetic Compatibility. Part 4-24. Methods of testing and measurement. Methods of testing devices for protection from an electromagnetic pulse of a high-altitude nuclear explosion and other conducted disturbances. Basic EMC publication (EN 61000-4-

DSTU EN 61000-4-27:2012

Electromagnetic compatibility. Part 4-27. Testing and measurement procedures. Immunity Test

DSTU EN 61000-4-8:2012

Electromagnetic compatibility. Part 4-8. Testing and measurement procedures. Magnetic field immunity test

DSTU EN 61000-5-7:2012

Electromagnetic compatibility. Part 5-7. Hardware Installation Guide and Interference Suppression. Degrees of protection provided by the enclosures against electromagnetic interference (EM code)

DSTU EN 62305-1:2012

Lightning protection. Part 1. General principles (EN 62305-1: 2011, IDT)

DSTU EN 62305-3:2012

Lightning protection. Part 3. Physical destruction of structures and danger to human life (EN 62305-3: 2011, IDT)

DSTU EN 62305-4:2012

Protection against lightning. Part 4. Electrical and electronic systems located in buildings and structures (EN 62305-4: 2011, IDT)

DSTU EN 777-2:2012

Multi-burner gas suspended heating systems with radiating tubes for industrial applications. Part 2. System type E. Safety requirements

DSTU EN ISO 10370:2012

Oil products. Determination of coke residue micromethods (EN ISO 10370: 1996, IDT)

DSTU EN ISO 14596:2012

Oil products. Determination of sulfur content by X-ray fluorescence spectrometry with wavelength dispersion (EN ISO 14596: 2007, IDT)

DSTU EN ISO 20884:2012

Oil products. Method for determination of sulfur content in automotive fuels by X-ray fluorescence spectrometry with wavelength dispersion (EN ISO 20884: 2011, IDT)

«
1
…
3
4
5
6
7
8
9
…
12
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!