Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
2
3
4
5
6
7
8
…
12
»

DSTU B EN 13163:2012

Building materials insulation. Products from the made foam polystyrene (EPS). Specifications (EN 13163: 2008, IDT)

DSTU B EN 13598-2:2012

Plastic piping systems for free-flow drainage and sewage. Unplasticized polyvinyl chloride (PVCU), polypropylene (PP) and polyethylene (PE). Part 2. Requirements for wells and inspection chambers in places of traffic and deep underground laying (EN 13598-

DSTU B EN 14216:2012

Cement. Composition, specifications and criteria for compliance of special cements with low heat release (EN 14216: 2004, IDT)

DSTU B EN 14364:2012

Plastic piping systems for pressure and free-flow drainage and sewage. Glass fiber-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and connections (EN 14364: 2006 A1: 2008, IDT)

DSTU B EN 1555-1:2012

Plastic piping systems for supplying gaseous fuels. Polyethylene (PE). Part 1. General requirements (EN 1555-1: 2010, IDT)

DSTU B EN 1555-2:2012

Plastic piping systems for supplying gaseous fuels. Polyethylene (PE). Part 2. Pipes (EN 1555-2: 2010, IDT)

DSTU B EN 1555-5:2012

Plastic piping systems for supplying gaseous fuels. Polyethylene (PE). Part 5. System availability for use (EN 1555-5: 2010, IDT)

DSTU B EN 15743:2012

Cement sulphate slag. Composition, technical conditions and conformity criteria (EN 15743: 2010, IDT)

DSTU B EN 295-1:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewer systems. Part 1. Requirements (EN 295-1: 1991 A3: 1999, IDT)

DSTU B EN 295-2:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewer systems. Part 2. Quality control and sampling (EN 295-2: 1991 A1: 1999, IDT)

DSTU B EN 295-3:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewer systems. Part 3. Test methods (EN 295-3: 2012, IDT)

DSTU B EN 295-4:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewer systems. Part 4. Requirements for special fittings, transitional devices and interchangeable reinforcement (EN 295-4: 1995, IDT)

DSTU B EN 295-5:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewerage systems. Part 5. Requirements for perforated ceramic pipes (EN 295-5: 1994, IDT)

DSTU B EN 295-6:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewerage systems. Part 6. Requirements for ceramic observation wells (EN 295-6: 1995, IDT)

DSTU B EN 295-7:2012

Glazed ceramic pipes and pipe fittings and connectors for drainage and sewer systems. Part 7. Requirements for ceramic pipes when punching (EN 295-7: 1995, IDT)

DSTU B EN ISO 1167-1:2012

Pipes, fittings and assemblies from thermoplastics for transporting liquid and gaseous media. Determination of resistance to internal pressure. Part 1. General method (EN ISO 1167-1: 2006, IDT)

DSTU B EN ISO 1167-2:2012

Pipes, fittings and assemblies from thermoplastics for transporting liquid and gaseous media. Determination of resistance to internal pressure. Part 2. Preparation of pipe samples for testing (EN ISO 1167-2: 2006, IDT)

DSTU B EN ISO 1167-3:2012

Pipes, fittings and assemblies from thermoplastics for transporting liquid and gaseous media. Determination of resistance to internal pressure. Part 3. Preparation of components (EN ISO 1167-3: 2006, IDT)

DSTU B EN ISO 1167-4:2012

Pipes, fittings and assemblies from thermoplastics for transporting liquid and gaseous media. Determination of resistance to internal pressure. Part 4. Site preparation (EN ISO 1167-4: 2007, IDT)

DSTU B EN ISO 15876-1:2012

Plastic piping systems for hot and cold water supply. Polybutylene (PB). Part 1. General requirements (EN ISO 15876-1: 2003 A1: 2007, IDT)

DSTU B EN ISO 15876-2:2012

Plastic piping systems for hot and cold water. Polybutylene (PB). Part 2. Pipes (EN ISO 15876-2: 2003 A1: 2007, IDT)

DSTU B ISO 17484-1:2012

Plastic pipe systems of multilayer pipes for the construction of domestic gas pipelines with a maximum working pressure of not more than 5 bar (500 kPa). Part 1. Technical conditions for the system (ISO 17484-1: 2006, IDT)

DSTU B V.1.1-30:2012

Fire retardant coating for building load-bearing reinforced concrete structures. Method for determination of flame retardant ability (ENV 13381-3: 2002, MOD)

DSTU B V.2.4-6:2012

Water intake, water discharge and gates. Terms and Definitions

DSTU B V.2.5-63:2012

Non-pressure reinforced concrete pipes vibropressed with a cylindrical reinforcing cage. General technical conditions

DSTU CLC/TS 50131-2-7-1:2012

Alarm systems. Alarm systems. Part 2-7-1. Burglar safety acoustic detectors

DSTU EN 10370:2012

Oil products. Determination of coke residue micromethods (EN ISO 10370: 1996, IDT)

DSTU EN 1062-1:2012

Paints and varnishes. Paintwork materials and coating systems for exterior mineral and concrete surfaces. Part 1. Classification (EN 1062-1: 2004, IDT)

DSTU EN 116:2012

Diesel and domestic fuels. Method for the determination of the limiting temperature of filterability on a cold filter (EN 116: 1997, IDT)

DSTU EN 12101-1:2012

Smoke and heat removal systems. Part 1. Technical requirements for smoke screens (EN 12101-1: 2005, IDT EN 12101-1: 2005/A1: 2006, IDT)

DSTU EN 12101-2:2012

Smoke and heat removal systems. Part 2. Requirements for ventilation devices of natural smoke and heat removal systems (EN 12101-2: 2003, IDT)

DSTU EN 12259-2:2012

Stationary fire extinguishing systems. Elements of sprinkler and water dispensing. Part 2. Water management units (EN 12259-2: 1999, IDT EN 12259-2: 1999/A1: 2001, IDT EN 12259-2: 1999/A2: 2005, IDT EN 12259-2: 1999/AC : 2002, IDT)

DSTU EN 12259-4:2012

Stationary fire extinguishing systems. Elements of sprinkler and water dispensing. Part 4. Water signaling devices (EN 12259-4: 2000, IDT)

DSTU EN 12259-5:2012

Stationary fire extinguishing systems. Elements of sprinkler and water dispensing. Part 5. Water flow indicator (EN 12259-5: 2002, IDT)

DSTU EN 12662:2012

Oil products liquid. Method for determination of impurities in middle distillates (EN 12662: 2008, IDT)

DSTU EN 12945:2012

Limestone materials. Determination of neutralization ratio. Titrometric methods (EN 12945: 2008, IDT)

DSTU EN 12948:2012

Limestone materials. Determination of particle size by dry and wet screening (EN 12948: 2002, IDT)

DSTU EN 13016-1:2012

Liquid petroleum products. Saturated steam pressure Part 1. Determination of saturated vapor pressure with air content (ASVP) and calculation of equivalent dry vapor pressure (DVPE) (EN 13016-1: 2007, IDT)

DSTU EN 13193:2012

Packaging. Packaging and the environment. Terminology (EN 13193: 2000, IDT)

DSTU EN 13300:2012

Paints and varnishes. Water dispersion paintwork materials and coating systems for interior walls and ceilings. Classification (EN 13300: 2001, IDT)

DSTU EN 13437:2012

Packaging and recycling of material. Criteria for recycling methods. Recycling processes and flow patterns (EN 13437: 2003, IDT)

DSTU EN 13439:2012

Packaging. Energy Recovery Ratio Definition and calculation method (EN 13439: 2003, IDT)

DSTU EN 13440:2012

Packaging. Coefficient of recycling (recycling). Definition and calculation method (EN 13440: 2003, IDT)

DSTU EN 13475:2012

Limestone materials. Determination of calcium content. Oxalate method (EN 13475: 2001, IDT)

DSTU EN 13535:2012

Fertilizers and greenhouse materials. Classification (EN 13535: 2001, IDT)

DSTU EN 1359:2012

Diaphragm Meters. General specifications (EN 1359: 1998, A1: 2006, IDT)

DSTU EN 13650:2012

Ameliorants of soil and growth medium. Extraction of elements soluble in aqua regia (EN 13650: 2001, IDT)

DSTU EN 13651:2012

Ameliorants of soil and growth medium. Extraction of soluble nutrients with calcium chloride/DTPA (CAT) (EN 13651: 2001, IDT)

«
1
2
3
4
5
6
7
8
…
12
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power Industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!