Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ISO 7919-5:2014
DSTU ISO 7919-5:2014
Mechanical vibration. Evaluation of the state of the machines according to the results of vibration measurements on rotating shafts. Part 5. Aggregates of hydroelectric power stations and pumping stations (ISO 7919-5: 2005, IDT)
DSTU ISO 7975:2014
DSTU ISO 7975:2014
Cars. Braking on the turn. Open loop tests (ISO 7975: 2006, IDT)
DSTU ISO 7996:2014
DSTU ISO 7996:2014
Atmospheric air. Determination of the mass concentration of nitrogen oxides. Method of chemiluminescence (ISO 7996: 1985, IDT)
DSTU ISO 8003:2014
DSTU ISO 8003:2014
Carbonaceous materials for aluminum production. Peck for electrodes. Methods for measuring dynamic viscosity (ISO 8003: 1985, IDT)
DSTU ISO 8006:2014
DSTU ISO 8006:2014
Carbon materials for aluminum production. Peck for electrodes. Method for determination of ash content (ISO 8006: 1985, IDT)
DSTU ISO 8128-1:2014
DSTU ISO 8128-1:2014
Apple juice, apple juice concentrates and drinks containing apple juice. Determination of patulin content. Part 1. Method using highly separated liquid chromatography (ISO 8128-1: 1993, IDT)
DSTU ISO 8128-2:2014
DSTU ISO 8128-2:2014
Apple juice, apple juice concentrates and drinks containing apple juice. Determination of patulin content. Part 2. Using thin layer chromatography (ISO 8128-2: 1993, IDT)
DSTU ISO 8349:2014
DSTU ISO 8349:2014
Wheeled vehicles. Measurement of the coefficient of adhesion to the road surface (iso 8349: 2002, idt)
DSTU ISO 8855:2014
DSTU ISO 8855:2014
Wheeled vehicles. Dynamics and directional stability. Glossary (iso 8855: 2011, idt)
DSTU ISO 8981:2014
DSTU ISO 8981:2014
Wheat. Determination of varieties by electrophoresis (ISO 8981: 1993, IDT)
DSTU ISO 9327-1:2014
DSTU ISO 9327-1:2014
Steel forgings and vivals or forged bars to pressure products. Technical delivery conditions. Part 1. General requirements
DSTU ISO 9327-2:2014
DSTU ISO 9327-2:2014
Steel forgings and vivals or forged bars to pressure products. Technical delivery conditions. Part 2. Unalloyed and alloyed (Mo, Cr and CrMo) steels with specified properties at elevated temperature
DSTU ISO 9327-3:2014
DSTU ISO 9327-3:2014
Steel forgings and vivals or forged bars to pressure products. Technical delivery conditions. Part 3. Nickel steels with desired properties at low temperature
DSTU ISO 9327-4:2014
DSTU ISO 9327-4:2014
Steel forgings and vivals or forged bars to pressure products. Technical delivery conditions. Part 4. Welded fine-grained steels with a high conditional yield strength
DSTU ISO 9327-5:2014
DSTU ISO 9327-5:2014
Steel forgings and vivals or forged bars to pressure products. Technical delivery conditions. Part 5. Steel non-rust
DSTU ISO 9328-2:2014
DSTU ISO 9328-2:2014
Steel flat products for pressure purposes. Technical delivery conditions. Part 2. Unalloyed and alloyed steels with specified properties at elevated temperature
DSTU ISO 9328-3:2014
DSTU ISO 9328-3:2014
Steel flat products for pressure purposes. Technical delivery conditions. Part 3. Normalized weldable fine-grained steels
DSTU ISO 9328-4:2014
DSTU ISO 9328-4:2014
Steel flat products for pressure purposes. Technical delivery conditions. Part 4. Nickel-alloyed steels with desired properties at low temperature
DSTU ISO 9328-5:2014
DSTU ISO 9328-5:2014
Steel flat products for pressure purposes. Technical delivery conditions. Part 5. Weldable thermomechanically machined fine-grained steels
DSTU ISO 9606-1:2014
DSTU ISO 9606-1:2014
Qualification tests of welders. Fusion welding. Part 1. Steel
DSTU ISO 9647:2014
DSTU ISO 9647:2014
Steel and cast iron. Determination of vanadium content. Flame atomic absorption spectrometry
DSTU ISO 9688:2014
DSTU ISO 9688:2014
Shock and mechanical vibration. Analytical methods for assessing the resistance of mechanical impact systems. Requirements for the exchange of information between customers and analysis performers
DSTU ISO 9815:2014
DSTU ISO 9815:2014
Wheeled vehicles. Cars with trailers. Tests for lateral stability (iso 9815: 2010, idt)
DSTU ISO 9816:2014
DSTU ISO 9816:2014
Cars. The reaction of the car to turn off the engine when turning. Open loop tests (ISO 9816: 2006, IDT)
DSTU ISO 9855:2014
DSTU ISO 9855:2014
Atmospheric air. Determination of lead microparticles in aerosols deposited on filters. Atomic absorption spectrometric method (ISO 9855: 1993, IDT)
DSTU ISO 9978:2014
DSTU ISO 9978:2014
Radiation safety. Sealed radioactive sources. Test methods for leakage (ISO 9978: 1992, IDT)
DSTU ISO/IEC 10116:2014
DSTU ISO/IEC 10116:2014
Information technology. Security methods. Modes of operation for N-bit block cipher (ISO/IEC 10116: 2006 ISO/IEC 10116: 2006/Cor 1: 2008, IDT)
DSTU ISO/IEC 10118-2:2014
DSTU ISO/IEC 10118-2:2014
Information technology. Methods of protection. Hash function. Part 2. Hash functions using n-bit block encryption algorithm (ISO/IEC 10118-2: 2010 ISO/IEC 10118-2: 2010/Cor 1: 2011, IDT)
DSTU ISO/IEC 10118-4:2014
DSTU ISO/IEC 10118-4:2014
Information technology. Methods of protection. Hash functions. Part 4. Hash functions, use modular arithmetic (ISO/IEC 10118-4: 1998 ISO/IEC 10118-4: 1998/Cor 1: 2014 ISO/IEC 10118-4: 1998/Amd 1: 2014 IDT)
DSTU ISO/IEC 11770-1:2014
DSTU ISO/IEC 11770-1:2014
Information technology. Methods of protection. Security key management. Part 1. Structure (ISO/IEC 11770-1: 2010, IDT)
DSTU ISO/IEC 11770-2:2014
DSTU ISO/IEC 11770-2:2014
Information technology. Methods of protection. Security key management. Part 2. Mechanisms using symmetric methods (ISO/IEC 11770-2: 2008 ISO/IEC 11770-2: 2008/Cor 1: 2009, IDT)
DSTU ISO/IEC 11770-3:2014
DSTU ISO/IEC 11770-3:2014
Information technology. Methods of protection. Security key management. Part 3. Mechanisms using asymmetric development methods (ISO/IEC 11770-3: 2008 ISO/IEC 11770-3: 2008/Cor 1: 2009, IDT)
DSTU ISO/IEC 11770-4:2014
DSTU ISO/IEC 11770-4:2014
Information technology. Methods of protection. Security key management. Part 4. Mechanisms based on unstable secrets (ISO/IEC 11770-4: 2006 ISO/IEC 11770-4: 2006/Cor 1: 2009, IDT)
DSTU ISO/IEC 11770-5:2014
DSTU ISO/IEC 11770-5:2014
Information technology. Security methods. Key management. Part 5. Key management group (ISO/IEC 11770-5: 2011)
DSTU ISO/IEC 12207:2014
DSTU ISO/IEC 12207:2014
System and software engineering. Software life cycle processes (ISO/IEC 12207: 2008, IDT)
DSTU ISO/IEC 13888-1:2014
DSTU ISO/IEC 13888-1:2014
Information technology. Methods of protection. Without failure. Part 1. General provisions (ISO/IEC 13888-1: 2009, IDT)
DSTU ISO/IEC 13888-2:2014
DSTU ISO/IEC 13888-2:2014
Information technology. Methods of protection. Without failure. Part 2. Mechanisms of using symmetric methods (ISO/IEC 13888-2: 2010 ISO/IEC 13888-2: 2010/Cor 1: 2012, IDT)
DSTU ISO/IEC 13888-3:2014
DSTU ISO/IEC 13888-3:2014
Information technology. Methods of protection. Without failure. Part 3. Mechanisms for the use of asymmetric methods (ISO/IEC 13888-3: 2009, IDT)
DSTU ISO/IEC 14764:2014
DSTU ISO/IEC 14764:2014
Software Engineering. Software life cycle processes. Maintenance (ISO/IEC 14764: 2006, IDT)
DSTU ISO/IEC 14888-1:2014
DSTU ISO/IEC 14888-1:2014
Information technology. Methods of protection. Digital signatures with addition. Part 1. General provisions (ISO/IEC 14888-1: 2008, IDT)
DSTU ISO/IEC 14888-2:2014
DSTU ISO/IEC 14888-2:2014
Information technology. Methods of protection. Digital signatures with addition. Part 2. Identifier-based mechanisms (ISO/IEC 14888-2: 2008, IDT)
DSTU ISO/IEC 14888-3:2014
DSTU ISO/IEC 14888-3:2014
Information technology. Methods of protection. Digital signatures with addition. Part 3. Mechanisms based on certificates (ISO/IEC 14888-3: 2006 ISO/IEC 14888-3: 2006/Cor 1: 2007 ISO/IEC 14888-3: 2006/Cor 2: 2009 ISO/IEC 14888-3: 2006/Amd 1: 2010 ISO/IEC
DSTU ISO/IEC 15288:2014
DSTU ISO/IEC 15288:2014
System and software engineering. Systems life cycle processes (ISO/IEC 15288: 2008, IDT)
DSTU ISO/IEC 15289:2014
DSTU ISO/IEC 15289:2014
System and software engineering. Information product lifecycle content (documentation) (ISO/IEC 15289: 2011, IDT)
DSTU ISO/IEC 15946-1:2014
DSTU ISO/IEC 15946-1:2014
Information technology. Methods of protection. Cryptographic methods based on elliptic curves. Part 1. General Provisions (ISO/IEC 15946-1: 2008 ISO/IEC 15946-1: 2008/Cor 1: 2009 ISO/IEC 15946-1: 2008/Cor 2: 2014, IDT)
DSTU ISO/IEC 15946-5:2014
DSTU ISO/IEC 15946-5:2014
Information technology. Methods of protection. Cryptographic methods based on elliptic curves. Part 1. Generation of elliptic curves (ISO/IEC 15946-5: 2009 ISO/IEC 15946-5: 2009/Cor 1: 2012, IDT)
DSTU ISO/IEC 17021-3:2014
DSTU ISO/IEC 17021-3:2014
Conformity assessment. Requirements for bodies provide audit and certification of management systems. Part 3. Competency requirements for audits and certification of quality management systems
DSTU ISO/IEC 18014-1:2014
DSTU ISO/IEC 18014-1:2014
Information technology. Methods of protection. Services stamping time. Part 1. Fundamentals (ISO/IEC 18014-1: 2008, IDT)

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!