Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
39
40
41
42
43
44
45
46
»

DSTU ISO 3888-2:2014

Cars. Test areas for maneuver with a sharp lane change. Part 2. Obstacle avoidance (ISO 3888-2: 2011, IDT)

DSTU ISO 404:2014

Steel and steel products. General delivery specifications

DSTU ISO 4063:2014

Welding and related processes. Process List and Conventions

DSTU ISO 4112:2014

Cereals and legumes. Temperature measurement of stored grain in bulk (ISO 4112: 1990, IDT)

DSTU ISO 4130:2014

Wheeled vehicles. Three-dimensional coordinate system and control points. Terms and definitions (iso 4130: 1978, idt)

DSTU ISO 4138:2014

Cars. Stability when moving in a circle in the steady state. Open loop tests (ISO 4138: 2012, IDT)

DSTU ISO 4254-8:2014

Agricultural machines. Agricultural equipment. Safety requirements. Part 8. Machines for applying solid fertilizers

DSTU ISO 4254-9:2014

Agricultural machines. Agricultural equipment. Safety requirements. Part 9. Horizontal seeders

DSTU ISO 4608:2014

Plastics. Resins based on homopolymers and copolymers of vinyl chloride for general use. Method for determination of plasticizer absorption at room temperature (ISO 4608: 1998, IDT)

DSTU ISO 4618:2014

Paints and varnishes. Terms and definitions (ISO 4618: 2006, IDT)

DSTU ISO 4683-1:2014

Sheepskin Unmade. Part 1. Defect characteristics (ISO 4683-1: 1998, IDT)

DSTU ISO 4683-2:2014

Sheepskin unprocessed. Part 2. Designation and presentation (ISO 4683-2: 1999, IDT)

DSTU ISO 4728:2014

Essential oil of Spanish wild marjoram (Thymus mastichina L). Specifications (ISO 4728: 2003, IDT)

DSTU ISO 4942:2014

Steel and cast iron. Determination of vanadium content. Spectrophotometric method with N-BPHA

DSTU ISO 50001:2014

Energy saving. Energy management systems. Requirements and guidelines for use (ISO 50001: 2011, IDT)

DSTU ISO 5017:2014

Dense and molded refractory products. Method for determination of apparent density, open porosity and total porosity (ISO 5017: 1998, IDT)

DSTU ISO 5518:2014

Fruits, vegetables and their processed products. Determination of the content of benzoic acid. Spectrophotometric method

DSTU ISO 5529:2014

Wheat. Determination of sedimentation index by the Green method (ISO 5529: 2007, IDT)

DSTU ISO 5544:2014

Casein Methodology for determining the mass fraction of "bound ash". control method

DSTU ISO 5547:2014

Casein Determination of free acidity. control method

DSTU ISO 5549:2014

Casein and caseinates. The control method for determining the mass fraction of protein

DSTU ISO 5817:2014

Fusion welding. Welded joints. From steel, nickel, titanium and their alloys (except electron beam welding). Quality Levels Based on Joint Defects

DSTU ISO 5983-1:2014

Pet food. Determination of nitrogen content and calculation of crude protein content. Part 1. Kjeldahl (ISO 5983-1: 2005, IDT)

DSTU ISO 5983-2:2014

Pet food. Determination of nitrogen content and calculation of crude protein content. Part 2. Package of fermentation and distillation with water vapor (ISO 5983-2: 2005, IDT)

DSTU ISO 6123-2:2014

Rolls with rubber or plastic coating. Technical conditions. Part 2. Surface characteristics (ISO 6123-2: 1988, IDT)

DSTU ISO 6161:2014

Personal Eye Protection. Filters and eye protection against laser radiation (ISO 6161: 1981, IDT)

DSTU ISO 6186:2014

Plastics. Method for the determination of flowability (ISO 6186: 1998, IDT)

DSTU ISO 6257:2014

Carbonaceous materials for aluminum production. Peck for electrodes. Sampling (ISO 6257: 2002, IDT)

DSTU ISO 6401:2014

Plastics. Polyvinyl chloride Determination of residual manometer of vinyl chloride using gas chromatographic method (ISO 6401: 2008, IDT)

DSTU ISO 6557-2:2014

Fruits, vegetables and processed products. Determination of ascorbic acid content. Part 2. Practical methods (ISO 6557

DSTU ISO 6706:2014

Plastic laboratory glassware. Graduated graduated cylinders

DSTU ISO 6887-3:2014

Microbiology of food and animal feed. Preparation of research samples, initial suspension and ten-fold diluted for microbiological research. Part 3. Special rules for the preparation of fish and fish products

DSTU ISO 6934-1:2014

Steel for prestressed concrete. Part 1. General requirements

DSTU ISO 6935-1:2014

Steel for concrete reinforcement. Part 1. Smooth bars

DSTU ISO 6947:2014

Welding and related processes. Operating Provisions (ISO 6947: 2011, IDT)

DSTU ISO 6962:2014

Atomic Energy. Standard Test Method for the Matrix Stability for Solidification of Highly Radioactive Waste to Long-Term Alpha Exposure

DSTU ISO 6998:2014

Carbonaceous materials for aluminum production. Peck for electrodes. Method for determination of coke number (ISO 6998: 1997, IDT ISO 6998 1997/Cor 1: 1999, IDT)

DSTU ISO 6999:2014

Carbonaceous materials for aluminum production. Peck for electrodes. Determination of density by the pycnometric method (ISO 6999: 1983, IDT)

DSTU ISO 7176-22:2014

Wheelchairs. Part 22. Test preparation procedure

DSTU ISO 7183:2014

Compressed air dryers. Technical requirements and test methods (ISO 7183: 2007, IDT)

DSTU ISO 7218:2014

Microbiology of food and animal feed. General Guide to Microbiological Research

DSTU ISO 7366:2014

Animal and vegetable fats and oils. Determination of 1-monoglycerides and free glycerol

DSTU ISO 7401:2014

Wheeled vehicles. Test methods for dynamic stability in unsteady mode during lateral acceleration. Open loop tests (iso 7401: 2011, idt)

DSTU ISO 7482-1:2014

Goat skins unmanaged. Part 1. Designation of defects (ISO 7482-1: 1998, IDT)

DSTU ISO 7482-2:2014

Goat skins unmanaged. Part 2. Guide to sorting by weight and size (ISO 7482-2: 1999, IDT)

DSTU ISO 7482-3:2014

Goat skins unprocessed. Part 3. Guide to sorting by defect (ISO 7482-3: 2005, IDT)

DSTU ISO 7638-1:2014

Wheeled vehicles. Connectors for electrical connection of tractors and trailers. Part 1. Connectors for brake systems and chassis of wheeled vehicles with a nominal supply voltage of 24 v (iso 7638-1: 2003, idt)

DSTU ISO 7638-2:2014

Wheeled vehicles. Connectors for electrical connection of tractors and trailers. Part 2. Connectors for brake systems and running gear for wheeled vehicles with a nominal supply voltage of 12 v (iso 7638-2: 2003, idt)

«
1
…
39
40
41
42
43
44
45
46
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power Industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!