Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
30
31
32
33
34
35
36
…
46
»

DSTU EN ISO 11205:2014

Acoustics. The noise of machinery and equipment. An engineering method for determining sound pressure emission levels at a workstation and at other specified locations using sound intensity

DSTU EN ISO 11252:2014

Lasers and related equipment. Laser device. Minimum documentation requirements (EN ISO 11252: 2013, IDT)

DSTU EN ISO 11546-1:2014

Acoustics. Determination of sound insulation characteristics of shells. Part 1. Measurement in the laboratory (for declaration)

DSTU EN ISO 11546-2:2014

Acoustics. Determination of sound insulation characteristics of shells. Part 2. Measurements under operating conditions (for the purpose of acceptance and verification)

DSTU EN ISO 11553-1:2014

Safety of machines. Laser processing machines. Part 1. General safety requirements (EN ISO 11553-1: 2008, IDT)

DSTU EN ISO 11553-2:2014

Safety of machines. Laser processing machines. Part 2. Safety requirements for handheld laser processing devices (EN ISO 11553-2: 2008, IDT)

DSTU EN ISO 11553-3:2014

Machine Safety. Laser processing machines. Part 3. Methods of noise reduction and noise measurement for laser finishing machines and manual processing devices and related additional equipment (EN ISO 11553-3: 2013, IDT)

DSTU EN ISO 11554:2014

Optics and optical instruments. Lasers and laser equipment. Test methods for power, energy and time characteristics of a laser beam (EN ISO 11554: 2008, IDT)

DSTU EN ISO 11666:2014

Non-destructive testing of welds. Ultrasonic inspection reception levels

DSTU EN ISO 11680-1:2014

Forestry machines. Safety Requirements and Test Methods for Driven Rod Cutters Part 1. Units equipped with an internal combustion engine

DSTU EN ISO 11680-2:2014

Forestry machines. Safety Requirements and Test Methods for Driven Rod Cutters Part 2. Units with a shoulder power source

DSTU EN ISO 11681-1:2014

Forestry machines. Portable chain saws. Safety and control requirements. Part 1. Chain saws for clearing the forest

DSTU EN ISO 11681-2:2014

Forestry machines. Portable chain saws. Safety and control requirements. Part 2. Saws for tree care

DSTU EN ISO 11691:2014

Acoustics. Measurement of losses caused by noise mufflers installed in ducts in the absence of air flow. Laboratory approximate method

DSTU EN ISO 11806-1:2014

Agricultural and forestry machines. Safety requirements and tests of portable manual mechanical brush cutters and lawn mowers. Part 1. Machines equipped with an internal combustion engine

DSTU EN ISO 11806-2:2014

Agricultural and forestry machines. Safety requirements and tests of portable manual mechanical brush cutters and lawn mowers. Part 2. Machines for use with a backpack pack

DSTU EN ISO 11850:2014

Forestry machines. General safety requirements

DSTU EN ISO 11957:2014

The noise of cars. Determination of sound insulation of the cab. Tests in the laboratory and on site

DSTU EN ISO 12100:2014

Machine safety. General principles of calculation. Risk assessment and risk reduction

DSTU EN ISO 13307:2014

Microbiology of food products and animal feed. The primary stage of production. Sampling methods

DSTU EN ISO 13482:2014

Work and robotic devices. Safety Requirements for Personal Care Robots

DSTU EN ISO 13588:2014

Non-destructive testing of welds. Ultrasonic inspection Application of the automated phased array method (EN ISO 13588: 2012; IDT)

DSTU EN ISO 13732-1:2014

Ergonomics of the thermal environment. Methods for assessing human response in contact with surfaces. Part 1. Hot surfaces

DSTU EN ISO 13732-3:2014

Ergonomics of the thermal environment. Methods for assessing human response in contact with surfaces. Part 3. Cold surfaces

DSTU EN ISO 13849-1:2014

Machine safety. Security management system details. Part 1. General design principles

DSTU EN ISO 13849-2:2014

Machine safety. Security management system details. statement

DSTU EN ISO 13850:2014

Machine safety. Emergency stop. design principles

DSTU EN ISO 13855:2014

Machine safety. Placement of protective equipment depending on the speed of movement of parts of the human body

DSTU EN ISO 13856-1:2014

Machine safety. Pressure sensitive safety devices. Part 1. General principles for the design and testing of pressure-sensitive mats and decks

DSTU EN ISO 13856-2:2014

Machine safety. Pressure sensitive safety devices. Part 2. General principles for the design and testing of pressure-sensitive edges and strips

DSTU EN ISO 13856-3:2014

Machine safety. Pressure sensitive safety devices. Part 3. Basic principles for the construction and testing of pressure-sensitive limiters, plates, wires and similar devices

DSTU EN ISO 13857:2014

Machine safety. Safety distances to prevent damage to the upper and lower extremities

DSTU EN ISO 13900:2014

Steel. Determination of boron content. Curcumin spectrophotometric method after distillation

DSTU EN ISO 13944:2014

Plasticized mixtures of metal powders. Determination of plasticizer content. Modified Soxhlet extraction method (EN ISO 13944: 2012, IDT)

DSTU EN ISO 14119:2014

Machine safety. Locking devices connected to fences. Design and selection principles

DSTU EN ISO 14175:2014

Welding materials. Protective gases for arc welding and cutting (EN ISO 14175: 2008, IDT)

DSTU EN ISO 14284:2014

Steel and cast iron. Sampling and preparation for determination of chemical composition

DSTU EN ISO 14314:2014

Reciprocating internal combustion engines. Startup equipment. General safety requirements

DSTU EN ISO 14341:2014

Welding materials. Electrode wires and deposited metal in a protective gas by a consumable electrode of unalloyed and fine-grained steels. Classification

DSTU EN ISO 14555:2014

Welding. Arc welding studs made of metal materials

DSTU EN ISO 14602:2014

Inactive surgical implants. Implants for osteosynthesis. Individual requirements

DSTU EN ISO 14607:2014

Inactive surgical implants. Breast implants. Individual requirements

DSTU EN ISO 14630:2014

Inactive surgical implants. General requirements

DSTU EN ISO 14732:2014

Welding production personnel. Certification testing of automatic fusion welding operators and service engineers for resistance welding of metallic materials (EN ISO 14732: 2013, IDT)

DSTU EN ISO 14937:2014

Sterilization of medical products. General requirements for the characteristics of the agent, sterilization, as well as the development, validation and routine control of the sterilization process of medical devices (EN ISO 14937: 2009, IDT)

DSTU EN ISO 15189:2014

Medical laboratories. Quality and Competency Requirements

DSTU EN ISO 15536-1:2014

Ergonomics. Computer mannequins and body templates. Part 1. General requirements

DSTU EN ISO 15614-1:2014

Specifications and certification of technology for welding metal materials. Testing of welding processes. Part 1. Arc and gas welding of steels and arc welding of nickel and nickel alloys

«
1
…
30
31
32
33
34
35
36
…
46
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!