Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
25
26
27
28
29
30
31
…
46
»

DSTU EN 61058-1:2014

Switches for electrical appliances. Part 1. General requirements

DSTU EN 61058-2-1:2014

Switches to electrical appliances. Part 2-1. Separate switch requirements for cords

DSTU EN 61058-2-4:2014

Switches to electrical appliances. Part 2-4. Separate requirements for independently installed switches

DSTU EN 61058-2-5:2014

Switches to electrical appliances. Part 2-5. Separate selector switch requirements

DSTU EN 61095:2014

Contactors electromechanical household and similar purposes

DSTU EN 61131-2:2014

Programmable controllers. Part 2. General technical requirements and test methods (EN 61131-2: 2007, IDT)

DSTU EN 61138:2014

Cables for portable grounding and short circuit equipment

DSTU EN 61143-1:2014

Electrical measuring instruments. Single coordinate registry. Part 1. Definitions and requirements (EN 61143-1: 1994 EN 61143-1: 1994/A1: 1997, IDT)

DSTU EN 61143-2:2014

Electrical measuring instruments. Single coordinate registry. Part 2. Recommended additional test methods (EN 61143-2: 1994, IDT)

DSTU EN 61167:2014

Metal halide lamps. Performance requirements

DSTU EN 61187:2014

Electrical and electronic measuring equipment. Documentation (EN 61187: 1994 EN 61187: 1994/AC: 1995, IDT)

DSTU EN 61199:2014

Luminescent single-ended lamps. Safety requirements

DSTU EN 61204:2014

Low voltage DC power supplies. performance characteristics

DSTU EN 61204-7:2014

Low Voltage DC Power Supply. Part 7. Safety requirements (EN 61204-7: 2006 EN 61204-7: 2006/A11: 2009, IDT)

DSTU EN 61210:2014

Connecting devices. Flat bridged terminals for electrical copper conductors. Safety requirements

DSTU EN 61230:2014

Work under tension. Portable equipment for grounding or for grounding and short circuit

DSTU EN 61236:2014

Sockets, pole clamps (rod clamps) and live accessories

DSTU EN 61242:2014

Electrical accessories. Domestic and similar cable reels (EN 61242: 1997 EN 61242: 1997/A1: 2008 EN 61242: 1997/A1: 2008/AC: 2010, IDT)

DSTU EN 61243-3:2014

Work under tension. Voltage detectors. Part 3. Low-voltage bipolar indicators

DSTU EN 61293:2014

Marking of electrical equipment relative to electrical power indicators. Safety requirements (EN 61293: 1994, IDT)

DSTU EN 61310-1:2014

Machine safety. Designations, marking and actuation. Part 1. Requirements for visual, audible and tactile signals

DSTU EN 61310-2:2014

Machine safety. Designations, marking and actuation. Part 2. Labeling requirements

DSTU EN 61310-3:2014

Machine safety. Designations, marking and actuation. Part 3. Requirements for the location and operation of controls

DSTU EN 61316:2014

Coils for industrial cables (EN 61316: 1999, IDT)

DSTU EN 61326-1:2014

Electrical equipment for measurement, control, and laboratory use. Electromagnetic compatibility (EMC) requirements. Part 1. General requirements (EN 61326-1: 2013, IDT)

DSTU EN 61326-2-1:2014

Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 2-1. Additional requirements. Test scheme, operating conditions and performance of measuring equipment for unprotected EMC applications (EN 61326-2-1: 2013, IDT)

DSTU EN 61326-2-2:2014

Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility requirements. Part 2-2. Requirements. Test configurations, operating conditions and criteria for the performance of portable test, measuring and test equipment

DSTU EN 61326-2-3:2014

Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility requirements. Part 2-3. Special requirements. Test setup, operating conditions, performance for sensors with built-in or remote signal conditioning (EN 61326-2

DSTU EN 61326-2-4:2014

Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility requirements. Part 2-4. Special requirements. Test layout, operating conditions, performance for an insulation control device in accordance with IEC 61557-8 an

DSTU EN 61326-2-5:2014

Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility requirements. Part 2-5. Special requirements. Test scheme, operating conditions, performance for field equipment with bus interfaces according to IEC 61784-1 (

DSTU EN 61326-2-6:2014

Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 2-6. Specific requirements for in vitro diagnostic medical equipment

DSTU EN 61347-1:2014

Lamp control devices. Part 1. General and safety requirements

DSTU EN 61347-2-11:2014

Lamp control devices. Part 2-11. Separate requirements for various electronic circuits used in fixtures

DSTU EN 61347-2-12:2014

Lamp control devices. Part 2-12. Specific requirements for electronic ballasts powered by AC and DC current for discharge lamps (except fluorescent lamps)

DSTU EN 61347-2-2:2014

Lamp control devices. Part 2-2. Additional requirements for electronic buck converters powered by AC or DC current for incandescent lamps

DSTU EN 61347-2-3:2014

Controls of lamps. Part 2-3. Additional requirements for electronic control devices powered by AC and / or DC for fluorescent lamps

DSTU EN 61347-2-7:2014

Lamp control devices. Part 2-7. Additional requirements for electronic lamp control devices for emergency lighting, battery powered (stand-alone)

DSTU EN 61347-2-8:2014

Lamp control devices. Part 2-8. Additional requirements for control gears for fluorescent lamps (EN 61347-2-8: 2001; A1: 2006, DIT)

DSTU EN 61347-2-9:2014

Lamp control devices. Part 2-9. Additional requirements for ballasts for discharge lamps (except for fluorescent lamps)

DSTU EN 61386-1:2014

Cable duct systems. Part 1. General requirements (EN 61386-1: 2008, IDT)

DSTU EN 61386-21:2014

Conduit systems. Part 21. Additional requirements for rigid conduit pipes

DSTU EN 61386-22:2014

Cable piping systems. Part 22. Additional requirements for flexible conduit pipes

DSTU EN 61386-23:2014

Cable piping systems. Part 23. Additional requirements for flexible conduit pipes

DSTU EN 61386-24:2014

Cable piping systems. Part 24. Additional requirements for underground conduit systems

DSTU EN 61386-25:2014

Cable piping systems. Part 25. Additional requirements. Conduit Mounting Devices

DSTU EN 614-1:2014

Machine safety. Ergonomic design principles. Part 1. Terminology and general principles

DSTU EN 614-2:2014

Machine safety. Ergonomic design principles. Part 2. The relationship between machine design and work tasks

DSTU EN 61439-1:2014

Complete low-voltage distribution and control equipment. Part 1. General rules

«
1
…
25
26
27
28
29
30
31
…
46
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!