Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
16
17
18
19
20
21
22
…
27
»

DSTU EN ISO 6508-3:2017

Metallic materials. Rockwell hardness test. Part 3. Calibration of reference hardness measures

DSTU EN ISO 6530:2017

Protective clothing. Protection against liquid chemicals. Determination of resistance of materials to liquid penetration

DSTU EN ISO 6942:2017

Protective clothing. Heat and fire resistant protection. Test method. Evaluation of materials and material combinations exposed to a thermal radiation source

DSTU EN ISO 7235:2017

Acoustics. Laboratory measurement procedures for silencers and air diffusers. Insertion loss, noise flow loss and total pressure loss

DSTU EN ISO 7263:2017

Corrugated paper. Method for determination of resistance to plane compression after laboratory corrugation

DSTU EN ISO 7500-1:2017

Metallic materials. Calibration and calibration of machines for static uniaxial tests. Part 1. Tensile and compression testing machines. Calibration and calibration of load measuring systems

DSTU EN ISO 75-2:2017

Plastics. Determination of deflection temperature under load. Part 2. Plastics and hard rubber

DSTU EN ISO 7837:2017

Fertilizers Determination of bulk density (bulk) of fine-grained fertilizers

DSTU EN ISO 80079-36:2017

Explosive atmospheres. Part 36. Non-electric equipment for explosive atmospheres. Basic method and requirements

DSTU EN ISO 80079-37:2017

Explosive atmospheres. Part 37. non-electric equipment for explosive atmospheres. Non-electric degree of protection with structural safety “c”, control of ignition source “b”, immersion in liquid “k”

DSTU EN ISO 8098:2017

Bicycles Safety requirements for bicycles for young children

DSTU EN ISO 8256:2017

Plastics. Determination of tensile strength

DSTU EN ISO 868:2017

Plastics and hard rubber. Determination of indentation hardness with a hardness tester (Shore hardness)

DSTU EN ISO 8799:2017

Surfactants. Sulfated ethoxylated alcohols and alkylene phenols. Determination of sulphate-free substance

DSTU EN ISO 9093-1:2017

Small vessels. Outboard valves and fittings passing through the body. Part 1. Metal cases

DSTU EN ISO 9151:2017

Clothing for protection against heat and flame. Determination of heat transfer when exposed to flame

DSTU EN ISO 9185:2017

Protective clothing. Assessment of the resistance of materials to splash of molten metal

DSTU EN ISO 9241-112:2017

Ergonomic requirements for working with video terminals in the office. Part 112. Presentation of information

DSTU EN ISO 9241-13:2017

Ergonomic requirements for working with video terminals in the office. Part 13. Use Guide

DSTU EN ISO 9241-14:2017

Ergonomic requirements for working with video terminals in the office. Part 14. Dialog menu

DSTU EN ISO 9606-2:2017

Qualification tests of welders. Fusion welding. Part 2. Aluminum and aluminum alloys

DSTU EN ISO 9606-3:2017

Qualification tests of welders. Fusion welding. Part 3. Copper and copper alloys

DSTU EN ISO 9606-4:2017

Qualification tests of welders. Fusion welding. Part 4. Nickel and nickel alloys

DSTU EN ISO 9606-5:2017

Qualification tests of welders. Fusion welding. Part 5. Titanium and titanium alloys, zirconium and zirconium alloys

DSTU EN ISO/IEC 17021-1:2017

Conformity assessment. Requirements for bodies that carry out audit and certification of management systems. Part 1. Requirements

DSTU EN ISO/IEC 17043:2017

Conformity assessment. General requirements for proficiency testing

DSTU ETSI EG 201399:2017

Electromagnetic compatibility and radio frequency spectrum. Guideline on the development of harmonized standards for radio equipment complying with the provisions of Directive R & TTE 1999/5 / EC and the introductory guidance on the impact of Directive 2014/53 / EU (RED) on harmonized standards

DSTU ETSI EG 203336:2017

Electromagnetic compatibility and radio frequency spectrum. Development of harmonized standards for radio equipment. Technical Parameter Selection Guide

DSTU ETSI EG 203367:2017

Guidance on the application of harmonized standards for radio equipment with many radio technologies, combined radio equipment without radio technologies

DSTU ETSI EN 300086-2:2017

Electromagnetic compatibility and radio frequency spectrum. Land mobile service. Radio equipment with an internal or external RF connector, designed primarily for analogue voice transmission. Part 2. Requirements and test methods

DSTU ETSI EN 300220-2:2017

Short-range radio equipment in the frequency range from 25 MHz to 1000 MHz. Part 2. General technical requirements

DSTU ETSI EN 300296-2:2017

Electromagnetic compatibility and radio frequency spectrum. Land mobile service. Radio equipment with an integrated antenna for analog voice transmission. Part 2. Requirements and test methods

DSTU ETSI EN 300328:2017

Radio access systems in the 2.4 GHz frequency range. Technical requirements and test methods

DSTU ETSI EN 300386:2017

Equipment for telecommunication networks. EMC requirements. Harmonized standard that covers the essential requirements of the 2014 Directive

DSTU ETSI EN 300390-2:2017

Electromagnetic compatibility and radio frequency spectrum. Land mobile service. Radio equipment with a built-in antenna for data and voice. Part 2. Requirements and test methods

DSTU ETSI EN 300468:2017

Digital television broadcasting (DVB). Service information in DVB systems. General technical information requirements

DSTU ETSI EN 300472:2017

Digital television broadcasting (DVB). Teletext information transmission in DVB digital streams. General technical requirements

DSTU ETSI EN 300743:2017

Digital television broadcasting (DVB). Subtitle input systems. General technical requirements

DSTU ETSI EN 301192:2017

Digital television broadcasting (DVB). Data transmission systems. General technical requirements

DSTU ETSI EN 301428:2017

Satellite earth stations and systems. Small satellite communications stations that operate in frequency bands 11

DSTU ETSI EN 301442:2017

Satellite earth stations and systems. Mobile terrestrial stations of personal communication satellite networks operating in the frequency bands from 1980 MHz to 2010 GHz (Earth-to-space) and from 2170 MHz to 2200 MHz (space-to-Earth) of the mobile satellite service. Technical requirements and test methods

DSTU ETSI EN 301444:2017

Satellite Earth Stations and Systems. Terrestrial mobile land-based voice and / or data stations operating in the 1.5 GHz and 1.6 GHz bands. Specifications and test methods

DSTU ETSI EN 301489-12:2017

Electromagnetic compatibility of radio equipment and radio services. Part 12. Special conditions for testing small satellite communications stations and satellite interactive earth stations in the fixed-satellite service operating in the frequency ranges from 4 GHz to 30 GHz

DSTU ETSI EN 301489-9:2017

Electromagnetic compatibility of radio equipment and radio services. Part 9. Special conditions for wireless microphones, such as radio frequency audio channel equipment, wireless audio devices and auditory monitoring devices

DSTU ETSI EN 301502:2017

GSM standard digital cellular radio communication systems equipment. Technical requirements and test methods

DSTU ETSI EN 301598:2017

Devices for working in an unused frequency spectrum. Wireless access systems operating in the frequency band of television broadcasting from 470 MHz to 790 MHz. Technical requirements and test methods

DSTU ETSI EN 301843-6:2017

Electromagnetic compatibility of radio equipment and radio services. Part 6. Special conditions for testing ship earth stations operating in the frequency range exceeding 3 GHz

DSTU ETSI EN 301893:2017

Radio access equipment in the 5 GHz frequency range. Technical requirements and test methods

«
1
…
16
17
18
19
20
21
22
…
27
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!