Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ISO 2353:2013
DSTU ISO 2353:2013
Magnesium and magnesium alloys. Determination of manganese in magnesium alloys containing zirconium, rare earth elements, thorium and silver by the photometric method using periodate
DSTU ISO 2354:2013
DSTU ISO 2354:2013
Magnesium alloys. Determination of insoluble zirconium content by the photometric method using alizarin sulfonate
DSTU ISO 2355:2013
DSTU ISO 2355:2013
Magnesium and magnesium alloys. Chemical analysis. Determination of rare earths by gravimetric method
DSTU ISO 2408:2013
DSTU ISO 2408:2013
Steel wire ropes for general purposes. General technical requirements and test methods
DSTU ISO 2424:2013
DSTU ISO 2424:2013
Textile covers on the floor. glossary of terms
DSTU ISO 24511:2013
DSTU ISO 24511:2013
Water supply and drainage. Guidance on the management of sewage systems and assessment of their services (ISO 24511: 2007, IDT)
DSTU ISO 26322-1:2013
DSTU ISO 26322-1:2013
Agricultural and forestry tractors. Safety requirements. Part 1. Standard tractors (ISO 26322-1: 2008, IDT)
DSTU ISO 26322-2:2013
DSTU ISO 26322-2:2013
Agricultural and forestry tractors. Safety requirements. Part 2. Narrow-gauge and small-sized tractors (ISO 26322-2: 2010, IDT)
DSTU ISO 2633:2013
DSTU ISO 2633:2013
Determination of floor loads in industrial buildings and warehouses (ISO 2633: 1974, IDT)
DSTU ISO 26845:2013
DSTU ISO 26845:2013
Refractories. Chemical analysis. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 26845: 2008, IDT)
DSTU ISO 2692:2013
DSTU ISO 2692:2013
Technical requirements for product geometry (GPS). Geometric tolerances. Maximum Material (MMR), Material Minimum (LMR) and Interaction (RPR) requirements (ISO 2692: 2006, IDT)
DSTU ISO 28218:2013
DSTU ISO 28218:2013
Radiation Protection. Criteria for conducting radiobiological analysis (ISO 28218: 2010, IDT)
DSTU ISO 3116:2013
DSTU ISO 3116:2013
Magnesium and magnesium alloys. Deformed magnesium alloys. Technical conditions
DSTU ISO 317:2013
DSTU ISO 317:2013
Manganese ores and concentrates. Arsenic determination by spectrometry (ISO 317: 1984, IDT)
DSTU ISO 3255:2013
DSTU ISO 3255:2013
Magnesium and magnesium alloys. Determination of aluminum by photometric method using chromazurol S
DSTU ISO 3435:2013
DSTU ISO 3435:2013
Continuous mechanical handling equipment. Classification and designation of bulk materials (ISO 3435: 1977, IDT)
DSTU ISO 3583:2013
DSTU ISO 3583:2013
Wheeled vehicles. Compounds for measuring the pressure of compressed air in air brake systems. Basic parameters (iso 3583: 1984, idt)
DSTU ISO 3662:2013
DSTU ISO 3662:2013
Volumetric hydraulic actuators. Pumps and hydraulic motors. Nominal working volumes (ISO 3662: 1976, IDT)
DSTU ISO 3767-4:2013
DSTU ISO 3767-4:2013
Agricultural and forestry tractors and machines, driving lawn and garden equipment. Symbols of controls and other objects. Part 4. Forestry machines
DSTU ISO 3776-2:2013
DSTU ISO 3776-2:2013
Agricultural tractors and machines. Seat belts. Part 2. Strength requirements for anchoring
DSTU ISO 3776-3:2013
DSTU ISO 3776-3:2013
Agricultural tractors and machines. Seat belts. Part 3. Installation requirements (ISO 3776-3: 2009, IDT)
DSTU ISO 3918:2013
DSTU ISO 3918:2013
Milking machines. Glossary (ISO 3918: 2007, IDT)
DSTU ISO 3974:2013
DSTU ISO 3974:2013
Sheep for slaughter. Terms and Definitions
DSTU ISO 3975:2013
DSTU ISO 3975:2013
Horses for slaughter. Terms and Definitions
DSTU ISO 3994:2013
DSTU ISO 3994:2013
Plastic thermoplastic spirally reinforced sleeves for suction and discharge of water materials. Technical specifications
DSTU ISO 3999:2013
DSTU ISO 3999:2013
Radiation Protection. Instruments for industrial gamma radiography. Technical requirements for operation, design and testing (ISO 3999: 2004, IDT)
DSTU ISO 4125:2013
DSTU ISO 4125:2013
Dry and dried fruits. Terms and definitions and nomenclature
DSTU ISO 4252:2013
DSTU ISO 4252:2013
Agricultural tractor. The workplace of the operator. Entry and Exit Dimensions
DSTU ISO 4254-10:2013
DSTU ISO 4254-10:2013
Agricultural machines. Agricultural equipment. Safety requirements. Part 10. Rotary tedders and rakes
DSTU ISO 4254-11:2013
DSTU ISO 4254-11:2013
Agricultural machinery. Safety requirements. Part 11. Balers (ISO 4254-11: 2010, IDT)
DSTU ISO 4254-5:2013
DSTU ISO 4254-5:2013
Agricultural machines. Agricultural equipment. Safety requirements. Part 5. Equipment with mechanical drive
DSTU ISO 4254-6:2013
DSTU ISO 4254-6:2013
Agricultural machinery. Safety requirements. Part 6. Sprayers and distributors for liquid fertilizers (ISO 4254-6: 2009, IDT)
DSTU ISO 4395:2013
DSTU ISO 4395:2013
Hydraulic and pneumatic systems and their elements. The ends of the piston rods of the cylinders. Types and Sizes
DSTU ISO 4409:2013
DSTU ISO 4409:2013
Volumetric hydraulic actuators. Volumetric pumps, hydraulic motors and hydraulic transmissions. Test methods and presentations of the main permanent performance characteristics (ISO 4409: 2007, IDT)
DSTU ISO 4411:2013
DSTU ISO 4411:2013
Volumetric hydraulic actuators. Hydroapparatus. Methods for determining the dependence of pressure drop on flow (ISO 4411: 2008, IDT)
DSTU ISO 4674-1:2013
DSTU ISO 4674-1:2013
Textile with rubber or plastic coating. Determination of tear resistance. Part 1. Method using constant coefficient of torment
DSTU ISO 4996:2013
DSTU ISO 4996:2013
Hot-rolled steel sheet with a high yield strength of structural quality. Technical conditions
DSTU ISO 4997:2013
DSTU ISO 4997:2013
Carbon steel letter, cold pressed in structural quality. Technical specifications
DSTU ISO 5016:2013
DSTU ISO 5016:2013
Refractory heat-insulated molded products. Method for determining apparent density and total porosity (ISO 5016: 1997, IDT)
DSTU ISO 5049-1:2013
DSTU ISO 5049-1:2013
Continuous lift-and-transport equipment for bulk materials. Part 1. Rules for the design of steel structures (ISO 5049-1: 1994, IDT)
DSTU ISO 5165:2013
DSTU ISO 5165:2013
Oil products. Determination of the ignition characteristics of diesel fuels. Engine cetane method (ISO 5165: 1998, IDT)
DSTU ISO 5168:2013
DSTU ISO 5168:2013
Fluid flow measurements. Uncertainty Assessment Techniques
DSTU ISO 5196-1:2013
DSTU ISO 5196-1:2013
Magnesium alloys. Definition of thorium. Part 1. Gravimetric method
DSTU ISO 5196-2:2013
DSTU ISO 5196-2:2013
Magnesium alloys. Definition of thorium. Part 2. Titrometric method
DSTU ISO 5291:2013
DSTU ISO 5291:2013
belt transmissions. Grooved pulleys for combined classic V-belts. Groove profiles AJ, BJ, CJ and DJ (efficient system) (ISO 5291: 1993, IDT)
DSTU ISO 5395:2013
DSTU ISO 5395:2013
Agricultural machines. Agricultural equipment. Self-propelled lawn mowers, lawn and garden tractors, professional mowers lawn and garden tractors with mowing devices. Definition, safety requirements and test methods
DSTU ISO 5418-1:2013
DSTU ISO 5418-1:2013
Iron ores. The definition of copper. Part 1. Spectrophotometric method using 2, 2'-biquinolyl (ISO 5418-1: 2006, IDT)
DSTU ISO 5418-2:2013
DSTU ISO 5418-2:2013
Iron ores. The definition of copper. Part 2. Flame atomic absorption spectrometric method (ISO 5418-2: 2006, IDT)

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!