Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ISO 10360-1:2013
DSTU ISO 10360-1:2013
Technical requirements for product geometry (GPS). Acceptance and control tests of coordinate measuring machines (CMM). Part 1. Glossary
DSTU ISO 10360-3:2013
DSTU ISO 10360-3:2013
Technical requirements for product geometry (GPS). Acceptance and control tests of coordinate measuring machines (CMM). Part 3. KVM with the axis of the rotating table, which is the fourth axis
DSTU ISO 10360-4:2013
DSTU ISO 10360-4:2013
Technical requirements for product geometry (GPS). Acceptance and control tests of coordinate measuring machines (CMM). Part 4. CMEs operating in scanning mode measurement (ISO 10360-4: 2000, IDT ISO 10360-4: 2000/Cor 1: 2002, IDT)
DSTU ISO 10360-5:2013
DSTU ISO 10360-5:2013
Technical requirements for product geometry (GPS). Acceptance and control tests of coordinate measuring machines (CMM). Part 5. Coordinate measuring machines with a bag-probe probe system
DSTU ISO 10405:2013
DSTU ISO 10405:2013
Oil and gas industry. Maintenance and use of casing and tubing (ISO 10405: 2000, IDT)
DSTU ISO 10414-1:2013
DSTU ISO 10414-1:2013
Oil and gas industry. Testing of drilling fluids under operating conditions. Part 1. Water based flushing fluids (ISO 10414-1: 2008, IDT)
DSTU ISO 10417:2013
DSTU ISO 10417:2013
Oil and gas industry. Underground safety valve systems. Design, installation, operation and retrofit (ISO 10417: 2004, IDT)
DSTU ISO 10424-1:2013
DSTU ISO 10424-1:2013
Oil and gas industry. Equipment for rotary drilling. Part 1. Elements of the drill string for rotary drilling (ISO 10424-1: 2004, IDT)
DSTU ISO 10439:2013
DSTU ISO 10439:2013
Petroleum, chemical and gas industry. Centrifugal compressors. General technical requirements and test methods (ISO 10439: 2002, IDT)
DSTU ISO 1049:2013
DSTU ISO 1049:2013
Continuous mechanical handling equipment for bulk materials. Vibrating conveyors and feeders with rectangular or trapezoid gutter. Dimensions and basic parameters (ISO 1049: 1975, IDT)
DSTU ISO 1050:2013
DSTU ISO 1050:2013
Continuous mechanical handling equipment for bulk materials. Screw conveyors. Dimensions (ISO 1050: 1975, IDT)
DSTU ISO 10708:2013
DSTU ISO 10708:2013
Water quality. Evaluation of the ability of organic compounds to complete aerobic biodegradation in the aquatic environment. Determination of biochemical oxygen consumption in a closed vessel Two-stage test (ISO 10708: 1997, IDT)
DSTU ISO 10752:2013
DSTU ISO 10752:2013
Coal sorting equipment. Performance evaluation (ISO 10752: 1994, IDT)
DSTU ISO 10766:2013
DSTU ISO 10766:2013
Volumetric hydraulic drives. Hydraulic cylinders. Sizes of seats for split sealing rings of rectangular cross section for pistons and rods
DSTU ISO 10975:2013
DSTU ISO 10975:2013
Agricultural tractors and machines. Automatic control systems for operator-controlled self-propelled machines. Safety requirements
DSTU ISO 10998:2013
DSTU ISO 10998:2013
Agricultural tractors. Steering Requirements
DSTU ISO 11001-3:2013
DSTU ISO 11001-3:2013
Agricultural wheeled tractors and implements. Coupling three-point devices. Part 3. hook the articulated
DSTU ISO 11064-6:2013
DSTU ISO 11064-6:2013
Ergonomic design of control centers. Part 6. Environmental requirements for control centers (ISO 11064-6: 2005, IDT)
DSTU ISO 11140-4:2013
DSTU ISO 11140-4:2013
Sterilization of medical devices. Chemical indicators. Part 4. Second-class indicators as an alternative to the Bowie and Dick-type pair penetration tests
DSTU ISO 11170:2013
DSTU ISO 11170:2013
Volumetric hydraulic drives. Filter elements. Test sequence with performance verification
DSTU ISO 1127:2013
DSTU ISO 1127:2013
Stainless steel pipe. Dimensions, tolerances and standard mass per unit length (ISO 1127: 1992, IDT)
DSTU ISO 11369:2013
DSTU ISO 11369:2013
Water quality. Determination of the content of individual substances by treating plants using high-performance liquid chromatography with ultraviolet detection after extraction in a solid-liquid system (ISO11369: 1997, IDT)
DSTU ISO 11512:2013
DSTU ISO 11512:2013
Forestry machines. Special tracked vehicles. Criteria for assessing the operational parameters of brake systems
DSTU ISO 11535:2013
DSTU ISO 11535:2013
Iron ores. Definition of various elements. Inductively Coupled Plasma Atomic Emission Spectrometry Method (ISO 11535: 2006, IDT)
DSTU ISO 11631:2013
DSTU ISO 11631:2013
Fluid flow measurements. Methods for characterizing a flowmeter
DSTU ISO 11737-1:2013
DSTU ISO 11737-1:2013
Sterilization of medical equipment. Microbiological methods. Part 1. Determination of the population of microorganisms on products (ISO 11737-1: 2006, IDT)
DSTU ISO 11737-2:2013
DSTU ISO 11737-2:2013
Sterilization of medical equipment. Microbiological methods. Part 2. Sterility tests performed to determine, validate and maintain the sterilization process.
DSTU ISO 1178:2013
DSTU ISO 1178:2013
Magnesium alloys. Determination of soluble zirconium by the photometric method using alizarin sulfonate
DSTU ISO 11787:2013
DSTU ISO 11787:2013
Agricultural and forestry machines. Exchange of data between management and executive computers. Data exchange syntax
DSTU ISO 11837:2013
DSTU ISO 11837:2013
Forestry machines. Protection systems in the event of an open saw chain. Test Method and Evaluation Criteria
DSTU ISO 11839:2013
DSTU ISO 11839:2013
Forestry machines. Glass and panel materials used in guards to protect the operator from rejected saw teeth. Test Method and Suitability Criteria
DSTU ISO 12097-2:2013
DSTU ISO 12097-2:2013
Wheeled vehicles. Elements of airbags. Part 2. Test methods for airbags (iso 12097-2: 1996, idt)
DSTU ISO 12510:2013
DSTU ISO 12510:2013
Earth-moving machinery. Operation and maintenance. Service Manual (ISO 12510: 2004, IDT)
DSTU ISO 12809:2013
DSTU ISO 12809:2013
Plant protection equipment. Oscillatory and centrifugal pumps. Test methods
DSTU ISO 13359:2013
DSTU ISO 13359:2013
Measurement of flow rate of electrically conductive fluid in closed pipelines. Flanged electromagnetic flowmeters. overall length
DSTU ISO 13709:2013
DSTU ISO 13709:2013
Oil, gas and chemical industry. Centrifugal pumps. General technical requirements and test methods (ISO 13709: 2009, IDT)
DSTU ISO 13726:2013
DSTU ISO 13726:2013
Volumetric hydraulic drives. Hydraulic cylinders with a one-sided rod for a nominal pressure of 16 MPa (160 bar) (compact series) with bore diameters from 250 mm to 500 mm. Mounting dimensions
DSTU ISO 13906:2013
DSTU ISO 13906:2013
Animal feed. Method for determination of acid-detergent fiber (KDK) and acid-detergent lignin (KDL) (ISO 13906: 2008, IDT)
DSTU ISO 13976:2013
DSTU ISO 13976:2013
Hot-rolled thick steel sheet in rolls of structural quality. Technical specifications
DSTU ISO 14006:2013
DSTU ISO 14006:2013
Environmental management systems. Recommendations for the implementation of environmental design (ISO 14006: 2011, IDT)
DSTU ISO 14040:2013
DSTU ISO 14040:2013
Environmental Management. Life cycle assessment. Principles and structure (ISO 14040: 2006, IDT)
DSTU ISO 14044:2013
DSTU ISO 14044:2013
Environmental Management. Life cycle assessment. Requirements and guidance (ISO 14044: 2006, IDT)
DSTU ISO 14152:2013
DSTU ISO 14152:2013
Protection against neutron radiation. Calculation principles and provisions for the selection of relevant materials
DSTU ISO 14230-4:2013
DSTU ISO 14230-4:2013
Wheeled vehicles. Keyword protocol 2000 for diagnostic systems. Part 4. Requirements for exhaust emission related systems (iso 14230-4: 2000, idt)
DSTU ISO 14269-2:2013
DSTU ISO 14269-2:2013
Agricultural and forestry tractors and self-propelled machines. Environment in the operator's cab. Part 2. Test methods and performance characteristics of heating, ventilation and air conditioning systems
DSTU ISO 14269-3:2013
DSTU ISO 14269-3:2013
Agricultural and forestry tractors and self-propelled machines. Environment in the operator's cab. Part 3. Determination of the effect of solar heating
DSTU ISO 14269-4:2013
DSTU ISO 14269-4:2013
Agricultural and forestry tractors and self-propelled machines. Environment in the operator's cab. Part 4. Test method for filter element
DSTU ISO 14269-5:2013
DSTU ISO 14269-5:2013
Agricultural and forestry tractors and self-propelled machines. Environment in the operator's cab. Part 5. Test method for an overpressure system

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!