Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ITU-T G.812:2008
DSTU ITU-T G.812:2008
Timing requirements of slave clocks suitable for use as node clocks in synchronization networks
DSTU ITU-T G.813:2008
DSTU ITU-T G.813:2008
Timing characteristics of SDH equipment slave clocks (SEC)
DSTU ITU-T G.957:2008
DSTU ITU-T G.957:2008
Optical interfaces for equipment and systems relating to the synchronous digital hierarchy
DSTU ITU-T K.21:2008
DSTU ITU-T K.21:2008
Resistability of telecommunication equipment installed in customer premises to overvoltages and overcurrents
DSTU ITU-T K.50:2008
DSTU ITU-T K.50:2008
Safe limits of operating voltages and currents for telecommunication systems powered over the network
DSTU OIML D 16:2008
DSTU OIML D 16:2008
Principles of assurance of metrological control
DSTU OIML D 18:2008
DSTU OIML D 18:2008
The use of certified reference materials in fields covered by metrological control exercised by national services of legal metrology. Basic principles
DSTU OIML D 19:2008
DSTU OIML D 19:2008
Pattern evaluation and pattern approval
DSTU OIML D 20:2008
DSTU OIML D 20:2008
Initial and subsequent verification of measuring instruments and processes
DSTU OIML D 23:2008
DSTU OIML D 23:2008
Principles for metrological control of equipment used for verification
DSTU OIML D 27:2008
DSTU OIML D 27:2008
Initial verification of measuring instruments using the manufacturer's quality management system
DSTU OIML D 28:2008
DSTU OIML D 28:2008
Conventional value of the result of weighing in air (Revision of R 33)
DSTU OIML D 3:2008
DSTU OIML D 3:2008
Legal qualification of measuring instruments
DSTU OIML D 7:2008
DSTU OIML D 7:2008
The evaluation of flow standards and facilities used for testing water meters
DSTU OIML D 8:2008
DSTU OIML D 8:2008
Measurement standards. Choice, recognition, use, conservation and documentation
Price: $511.14
DSTU OIML D 9:2008
DSTU OIML D 9:2008
Principles of metrological supervision
DSTU OIML R 106-1:2008
DSTU OIML R 106-1:2008
Automatic rail-weighbridges. Part 1 : Metrological and technical requirements - Tests
DSTU OIML R 106-2:2008
DSTU OIML R 106-2:2008
Automatic rail-weighbridges. Part 2 : Test report format
DSTU OIML R 111-1:2008
DSTU OIML R 111-1:2008
Weights of classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1: Metrological and technical requirements
DSTU OIML R 111-2:2008
DSTU OIML R 111-2:2008
Weights of classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 2: Test report format
Price: $823.20
DSTU OIML R 61-1:2008
DSTU OIML R 61-1:2008
Automatic gravimetric filling instruments. Part 1 : Metrological and technical requirements - Tests
DSTU OIML R 61-2:2008
DSTU OIML R 61-2:2008
Automatic gravimetric filling instruments. Part 2: Test report format
DSTU ST SEV 151:2008
DSTU ST SEV 151:2008
Diameters of cutting tool shanks
DSTU ST SEV 198:2008
DSTU ST SEV 198:2008
Twist drills and countersinks. leash sizes
DSTU ST SEV 280:2008
DSTU ST SEV 280:2008
Steel washers for hexagon bolts and hexagon nuts. Accuracy class A. Dimensions
DSTU ST SEV 3962:2008
DSTU ST SEV 3962:2008
Basic norms for interchangeability. Round thread. Tolerances.
DSTU UIC 557:2008
DSTU UIC 557:2008
Diagnostics on passenger rolling stock
DSTU UIC 577:2008
DSTU UIC 577:2008
Wagon stresses
DSTU UN/ECE R 107-00:2008
DSTU UN/ECE R 107-00:2008
Uniform provisions concerning the approval of double-deck large passenger vehicles with regard to their general construction
DSTU UN/ECE R 107-01:2008
DSTU UN/ECE R 107-01:2008
Uniform provisions concerning the approval of double-deck large passenger vehicles with regard to their general construction
DSTU UN/ECE R 115:2008
DSTU UN/ECE R 115:2008
Uniform provisions concerning the approval of:I. Specific LPG (liquefied petroleum gases) retrofit systems to be installed in motor vehicles for the use of LPG in their propulsion system II. Specific CNG (compressed natural gas) retrofit systems to be installed in motor vehicles for the use of CNG in their propulsion system
DSTU UN/ECE R 115-00:2008
DSTU UN/ECE R 115-00:2008
Uniform provisions concerning the approval of: I. Special modified LPG systems (liquefied petroleum gas) intended for installation on motor vehicles used in LPG engines; Ii. Special modified LNG systems (compressed natural gas) intended for installation on motor vehicles whose engines use LNG (UNECE Regulations N 115: 2003, IDT)
DSTU UN/ECE R 42:2008
DSTU UN/ECE R 42:2008
Uniform provisions concerning the approval of vehicles with regard to their front and rear protective devices (bumpers, etc.)
DSTU-N 5018:2008
DSTU-N 5018:2008
Metrology. Automated systems for measuring water flow, volume and mass. Standard program of state metrological certification of measurement procedures.
DSTU-N B A.1.1-81:2008
DSTU-N B A.1.1-81:2008
System of standardization and regulation in construction. Basic requirements for buildings and structures. Guidelines for the application of the terms of the basic requirements for buildings and structures in accordance with the explanatory documents of t
DSTU-N B A.1.1-82:2008
DSTU-N B A.1.1-82:2008
Installation. The system of standardization and regulation in construction. Guidance document A on the designation of notified bodies for the work with the directive on building products
DSTU-N B A.1.1-83:2008
DSTU-N B A.1.1-83:2008
Installation. The system of standardization and regulation in construction. Guidance document B regarding the definition of production control at the enterprise in the technical specifications for building products
DSTU-N B A.1.1-84:2008
DSTU-N B A.1.1-84:2008
Installation. The system of standardization and regulation in construction. Guidance document C on the handling of kits and systems for a directive on building products
DSTU-N B A.1.1-85:2008
DSTU-N B A.1.1-85:2008
Installation. The system of standardization and regulation in construction. Guidance document H on the harmonization of approaches with regard to hazardous substances for the directive on construction products (Guydance paper N (concern and Construction P
DSTU-N B A.1.1-86:2008
DSTU-N B A.1.1-86:2008
SSNB. Installation Guidance document E on levels and classes according to the Construction Products Directive
DSTU-N B A.1.1-87:2008
DSTU-N B A.1.1-87:2008
SSNB. Installation Guidance document G. European system of classification of building products with fire effects on them
DSTU-N B A.1.1-88:2008
DSTU-N B A.1.1-88:2008
SSNB. Installation Guidance document D. CE marking in accordance with the Construction Products Directive
DSTU-N B A.1.1-89:2008
DSTU-N B A.1.1-89:2008
SSNB. Installation Guidance document K. Conformity assessment systems, the role and tasks of notified bodies in the field of the Construction Products Directive
DSTU-N B A.1.1-90:2008
DSTU-N B A.1.1-90:2008
SSNB. Installation Guidance document M on conformity assessment for the Construction Products Directive: initial product type testing and production control in an enterprise
DSTU-N B A.3.1-10:2008
DSTU-N B A.3.1-10:2008
Management, organization and technology. Guidelines for the technical diagnosis of vertical steel tanks
DSTU-N B A.3.1-11:2008
DSTU-N B A.3.1-11:2008
Management, organization and technology. Guide to visual and measuring control of welded joints and weldings of metal structures
DSTU-N B D.1.1-8:2008
DSTU-N B D.1.1-8:2008
Estimate documentation. Rules for determining the cost of scientific and technical works in construction
DSTU-N B EN 1990:2008
DSTU-N B EN 1990:2008
Eurocode. Basics of structural design (EN 1990: 2002, IDT)

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!