Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 27565:2008
DSTU GOST 27565:2008
Super pure chemicals. Concentration of microimpurities by evaporation
DSTU GOST 27566:2008
DSTU GOST 27566:2008
Superpure substances. Method of atomic emission spectroscopy for determination of chemical elements impurities in liquid-phase substances
DSTU GOST 27576:2008
DSTU GOST 27576:2008
State automized technical stability system of unified time. Information carriers in loral chronometric system
DSTU GOST 27587:2008
DSTU GOST 27587:2008
Technical means of analog computing technique. General requirements
DSTU GOST 27771:2008
DSTU GOST 27771:2008
The procedure characteristics for the interface between data termination equipment and data circuit terminating equipment general requirements and regulations
DSTU GOST 27788:2008
DSTU GOST 27788:2008
Retention knobs for tool shanks with 7/24 taper design
DSTU GOST 28016:2008
DSTU GOST 28016:2008
Threaded pipeline connections. Welded conical nipple. Construction
DSTU GOST 28043:2008
DSTU GOST 28043:2008
Personal computers. Removable heads hard fixed disk drive interface. General requirements
DSTU GOST 28044:2008
DSTU GOST 28044:2008
Internal broaches for straight splines based at internal diameter one pass combined type. Construction
DSTU GOST 28045:2008
DSTU GOST 28045:2008
Internal broaches for straight splines based at internal diameter double pass combined type. Construction
DSTU GOST 28046:2008
DSTU GOST 28046:2008
Internal broaches for straight splines based at internal diameter three pass combined type. Construction
DSTU GOST 28047:2008
DSTU GOST 28047:2008
Internal broaches for straight splines based at internal diameter four pass combined type. Construction
DSTU GOST 28048:2008
DSTU GOST 28048:2008
Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 1, 5 to 2, 5 mm. Construction
DSTU GOST 28049:2008
DSTU GOST 28049:2008
Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 2, 5 mm. Construction
DSTU GOST 28050:2008
DSTU GOST 28050:2008
Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction
DSTU GOST 28051:2008
DSTU GOST 28051:2008
Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction
DSTU GOST 28054:2008
DSTU GOST 28054:2008
Interface of fourlead keyboard. General requirements
DSTU GOST 28079:2008
DSTU GOST 28079:2008
Information processing systems. Data link protocol. Methods of synchronous character oriented data transmission
DSTU GOST 28080:2008
DSTU GOST 28080:2008
Information processing systems. Data link protocol. Method of synchronons bit oriented data transmission
DSTU GOST 28119:2008
DSTU GOST 28119:2008
Building-block machines. Adapters and adjustable bushes and locking nuts. Design
DSTU GOST 28120:2008
DSTU GOST 28120:2008
Nc metal-cutting machine tools. Prismatic shanks of holders. Design
DSTU GOST 28123:2008
DSTU GOST 28123:2008
Information processing systems. 12, 7-mm 9-track magnetic tapes with the density of recording 246 bit/mm. Technical requirements
DSTU GOST 28282:2008 (ISO 5414-2-82)
DSTU GOST 28282:2008 (ISO 5414-2-82)
Taper shank adapters 7:24 for cutters with cylindrical shank with flat. Basic dimensions
DSTU GOST 28319:2008
DSTU GOST 28319:2008
Subland twist drills for holes to screw with fillister head. Basic dimensions
DSTU GOST 2832:2008
DSTU GOST 2832:2008
Adjusting rings with screw fastening. Dimensions
DSTU GOST 28320:2008
DSTU GOST 28320:2008
Subland twist drills for holes prior to tapping screw thread. Basic dimensions
DSTU GOST 2833:2008
DSTU GOST 2833:2008
Spring rings for screw stoppering and grooves for them. Construction and dimensions
DSTU GOST 28338:2008 (ISO 6708-80)
DSTU GOST 28338:2008 (ISO 6708-80)
End mills with mechanically clamped indexable inserts. Basic dimensions
DSTU GOST 2839:2008
DSTU GOST 2839:2008
Double-ended open spanners. Construction and dimensions
DSTU GOST 2841:2008 (ISO 4229-77)
DSTU GOST 2841:2008 (ISO 4229-77)
Single-ended open spanners. Constructions and dimensions
DSTU GOST 28435:2008
DSTU GOST 28435:2008
End mills with mechanically clamped indexable inserts. Basic dimensions
DSTU GOST 28457:2008
DSTU GOST 28457:2008
Expansive dowels for building. Construction
DSTU GOST 28484:2008
DSTU GOST 28484:2008
Adjustable chucks with radial balance with internal Morse taper for reamers. Dimensions
DSTU GOST 28485:2008
DSTU GOST 28485:2008
Adjustable mandrels with external Morze taper and straight shank for drill chucкs. Dimensions
DSTU GOST 28521:2008
DSTU GOST 28521:2008
Cutting tools. Series of shank diameters
DSTU GOST 28700:2008
DSTU GOST 28700:2008
Wood-cutteng tool. Taper shanks with screw thread. Dimensions
DSTU GOST 28706:2008
DSTU GOST 28706:2008
Shanks cylindrical with a flat for drills. Dimensions
DSTU GOST 28706:2008 (ISO 6708-80)
DSTU GOST 28706:2008 (ISO 6708-80)
Cylindrical shanks with flats for drills. Dimensions
DSTU GOST 28759.2:2008
DSTU GOST 28759.2:2008
Steel flat welded flanges of vessels and apparatus. Design and dimensions
DSTU GOST 28759.3:2008
DSTU GOST 28759.3:2008
Steel butt welded flanges of vessels and apparatus. Design and dimensions
DSTU GOST 28759.4:2008
DSTU GOST 28759.4:2008
Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions
DSTU GOST 2876:2008
DSTU GOST 2876:2008
Gripping collets. Basic and coupling dimensions
DSTU GOST 2877:2008
DSTU GOST 2877:2008
Push-out collets. Basic and coupling dimensions
DSTU GOST 28773:2008
DSTU GOST 28773:2008
Plain bearings. Wrapped bushes with anti-friction layer based on polytetrafluoroethylene-KV. Dimensions and tolerances
DSTU GOST 28918:2008
DSTU GOST 28918:2008
Tnreaded pipe littings. Thrust and clamping rings. Construction
DSTU GOST 2893:2008
DSTU GOST 2893:2008
Rolling bearings. Grooves for locking spring rings. Locking shap rings. Dimensions
DSTU GOST 28941.1:2008
DSTU GOST 28941.1:2008
Flare straight fittings. Construction
DSTU GOST 28941.10:2008
DSTU GOST 28941.10:2008
Flare reducing branch tee fittings. Construction

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!