Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
35
36
37
38
39
40
41
…
75
»

DSTU GOST 19954:2008

Compensators for wax-pattern dies. Design and dimensions

DSTU GOST 19955:2008

Counter ejectors for wax-pattern dies. Design and dimensions

DSTU GOST 19956:2008

Aligning bush for wax-pattern dies. Design and dimensions

DSTU GOST 19957:2008

Struts for wax-pattern dies. Design and dimensions

DSTU GOST 19958:2008

Cylinder ejectors for wax-pattern dies. Design and dimensions

DSTU GOST 19959:2008

Rectangular ejectors for wax-pattern dies. Design and dimensions

DSTU GOST 19960:2008

Cylinder matrices-blanks for wax-pattern dies. Design and dimensions

DSTU GOST 19961:2008

Rectangular matrices-blanks for wax-pattern dies. Design and dimensions

DSTU GOST 19962:2008

Stops for wax-pattern dies. Design and dimensions

DSTU GOST 19963:2008

Locks for wax-pattern dies. Design and dimensions

DSTU GOST 19964:2008

Support plate for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19965:2008

Support plate for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19966:2008

Support plate for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19967:2008

Movable retainer rings for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19968:2008

Movable retainer rings for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19969:2008

Movable retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19970:2008

Stationary retainer rings for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19971:2008

Stationary retainer rings for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19972:2008

Stationary retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19973:2008

Intermediate plate-blanks for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19974:2008

Ejector plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19975:2008

Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19976:2008

Ejector plate-blanks for wax-pattern dies witn max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19977:2008

Ejector plate-blanks for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19978:2008

Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19979:2008

Pressure plate (blanks) for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19980:2008

Pressure plate-blanks for wax-pattern dies min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19981:2008

Pressure plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19982:2008

Base-blanks for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19983:2008

Base-blanks for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions

DSTU GOST 19984:2008

Base-blank for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19985:2008

Clamping plate for wax-pattern dies with cylinder matrices. Design and dimensions

DSTU GOST 19986:2008

Clamping plate for wax-pattern dies with rectangular matrices. Design and dimensions

DSTU GOST 19987:2008

Pouring date bushing of wax-pattern dies. Design and dimensions

DSTU GOST 19988:2008

Center rods for wax-pattern dies. Design and dimensions

DSTU GOST 19989:2008

Center buch for wax-pattern dies. Design and dimensions

DSTU GOST 19990:2008

Ejector return rod of wax-pattern dies. Design and dimensions

DSTU GOST 19991:2008

Ejector return slider of wax-pattern dies. Design and dimensions

DSTU GOST 19992:2008

Inclined pins for wax-pattern dies. Design and dimensions

DSTU GOST 19993:2008

Core removing disk-type attachments for wax-pattern dies. Design and dimensions

DSTU GOST 19994:2008

Core removing rack-type attachments for wax-pattern dies. Design and dimensions

DSTU GOST 19995:2008

Pin cams for wax-pattern dies. Design and dimensions

DSTU GOST 19996:2008

Put-in nipple for wax-pattern dies. Design and dimensions

DSTU GOST 19997:2008

Screwed-in nipple for wax-pattern dies. Design and dimensions

DSTU GOST 19998:2008

Pipe union for wax-pattern dies. Design and dimensions

DSTU GOST 20084:2008

Iron pattern plates for molding boxes having inside dimensions 400 x 300 mm, 450 x 350 mm, 500 x 400 mm for molding foundry machines without turn of half mold with squeezing. Design and dimensions

DSTU GOST 20085:2008

Iron pattern plates with changeable metal inserts for molding boxes having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for molding foundry machines without turn of half mold with squeezing. Design and dimensions

DSTU GOST 20086:2008

Iron pattern plates for molding boxes having inside dimensions 1000x600 mm for molding foundry machines without turn of half mold with squeezing. Design and dimensions

«
1
…
35
36
37
38
39
40
41
…
75
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!