Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 18784:2008
DSTU GOST 18784:2008
Mushroom-shaped pushers. Design and dimensions
DSTU GOST 18785:2008
DSTU GOST 18785:2008
Composite mushroom-shaped pushers. Design and dimensions
DSTU GOST 18786:2008
DSTU GOST 18786:2008
Female shouldered screws. Design and dimensions
DSTU GOST 18787:2008
DSTU GOST 18787:2008
Splined stepped screws. Design and dimensions
DSTU GOST 18788:2008
DSTU GOST 18788:2008
Extensions for shouldered screws. Design and dimensions
DSTU GOST 18789:2008
DSTU GOST 18789:2008
Limiting sleeves. Design and dimensions
DSTU GOST 18790:2008
DSTU GOST 18790:2008
Limiting clamps. Design and dimensions
DSTU GOST 18791:2008
DSTU GOST 18791:2008
Limit switches for ejectors. Design and dimensions
DSTU GOST 18792:2008
DSTU GOST 18792:2008
Locking washers for ejector limit switches. Design and dimensions
DSTU GOST 18793:2008
DSTU GOST 18793:2008
Compression springs. Design and dimensions
DSTU GOST 18794:2008
DSTU GOST 18794:2008
Tension springs. Design and dimensions
DSTU GOST 18795:2008
DSTU GOST 18795:2008
Bushes for spring packs. Design and dimensions
DSTU GOST 18796:2008
DSTU GOST 18796:2008
Nuts for spring packs. Design and dimensions
DSTU GOST 18797:2008
DSTU GOST 18797:2008
Guided nuts for spring packs. Design and dimensions
DSTU GOST 18798:2008
DSTU GOST 18798:2008
Pins for springs. Design and dimensions
DSTU GOST 18799:2008
DSTU GOST 18799:2008
Packs of springs. Design and dimensions
DSTU GOST 18800:2008
DSTU GOST 18800:2008
Threaded rods for packs of disc springs. Design and dimensions
DSTU GOST 18801:2008
DSTU GOST 18801:2008
Nuts for packs of disc springs. Design and dimensions
DSTU GOST 18802:2008
DSTU GOST 18802:2008
Bush stops. Design and dimensions
DSTU GOST 18803:2008
DSTU GOST 18803:2008
Cylindrical eatchers. Design and dimensions
DSTU GOST 18805:2008
DSTU GOST 18805:2008
Square eatchers. Design and dimensions
DSTU GOST 18807:2008
DSTU GOST 18807:2008
Stepped stops. Design and dimensions
DSTU GOST 18808:2008
DSTU GOST 18808:2008
Guide plates. Design and dimensions
DSTU GOST 18809:2008
DSTU GOST 18809:2008
Chamfered guide plates. Design and dimensions
DSTU GOST 18810:2008
DSTU GOST 18810:2008
Chamfered guide plates with threaded bores. Design and dimensions
DSTU GOST 18811:2008
DSTU GOST 18811:2008
Guide prisms. Design and dimensions
DSTU GOST 18813:2008
DSTU GOST 18813:2008
Sheet stamping dies. Рrotective caps. Design and dimensions
DSTU GOST 18815:2008
DSTU GOST 18815:2008
Air line holders. Design and dimensions
DSTU GOST 18816:2008
DSTU GOST 18816:2008
Handling threaded dowel. Design and dimensions
DSTU GOST 18817:2008
DSTU GOST 18817:2008
Handling lugs, covering. Design and dimensions
DSTU GOST 18818:2008
DSTU GOST 18818:2008
Bolsters with one aperture. Design and dimensions
DSTU GOST 18819:2008
DSTU GOST 18819:2008
Bolsters with two apertures. Design and dimensions
DSTU GOST 18820:2008
DSTU GOST 18820:2008
Bolsters with three apertures. Design and dimensions
DSTU GOST 18821:2008
DSTU GOST 18821:2008
Bolsters with four apertures. Design and dimensions
DSTU GOST 18822:2008
DSTU GOST 18822:2008
Bolsters with five apertures. Design and dimensions
DSTU GOST 18823:2008
DSTU GOST 18823:2008
Low bolsters. Design and dimensions
DSTU GOST 18828:2008
DSTU GOST 18828:2008
Ring single-ended square spanners. Design and dimensions
DSTU GOST 18839:2008
DSTU GOST 18839:2008
Machine-hand non-shaving taps. Design and dimensions
DSTU GOST 18840:2008
DSTU GOST 18840:2008
Nut non-shaving taps. Design and dimensions
DSTU GOST 18841:2008
DSTU GOST 18841:2008
Nut non-shaving taps with curved shanks. Design and dimensions
DSTU GOST 18842:2008
DSTU GOST 18842:2008
Non-shaving taps. Required dimensions
DSTU GOST 18843:2008
DSTU GOST 18843:2008
Non-slaving taps. Thread tolerances
DSTU GOST 18868:2008
DSTU GOST 18868:2008
HSS tipped bent bullnose turning tools. Design and dimensions
DSTU GOST 18869:2008
DSTU GOST 18869:2008
HSS straight bullnose turning tools. Design and dimensions
DSTU GOST 18870:2008
DSTU GOST 18870:2008
HSS side bullnose turning tools. Design and dimensions
DSTU GOST 18871:2008
DSTU GOST 18871:2008
HSS tipped face side turning tools. Design and dimensions
DSTU GOST 18872:2008
DSTU GOST 18872:2008
HSS boring and turning tools for through holes. Design and dimensions
DSTU GOST 18873:2008
DSTU GOST 18873:2008
HSS boring and turning tools for blind holes. Design and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!