Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ISO 3767-5:2009
DSTU ISO 3767-5:2009
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Part 5. Symbols for manual portable forestry machinery (ISO 3767-5:1992+ ISO 3767-5:1992/ Amd.1: 2001, IDT)
DSTU ISO 377:2009
DSTU ISO 377:2009
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
DSTU ISO 3776-1:2009
DSTU ISO 3776-1:2009
Tractors and machinery for agriculture -- Seat belts -- Part 1: Anchorage location requirements
DSTU ISO 3837:2009
DSTU ISO 3837:2009
Liquid petroleum products
DSTU ISO 3887:2009
DSTU ISO 3887:2009
Steels . Determination of depth of decarburization
DSTU ISO 3927:2009
DSTU ISO 3927:2009
Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
DSTU ISO 3951-1:2009
DSTU ISO 3951-1:2009
Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
DSTU ISO 3951-2:2009
DSTU ISO 3951-2:2009
Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
DSTU ISO 3951-3:2009
DSTU ISO 3951-3:2009
Sampling procedures for inspection by variables -- Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-bylot inspection
DSTU ISO 3951-5:2009
DSTU ISO 3951-5:2009
Sampling procedures for inspection by variables -- Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
DSTU ISO 4002-1:2009
DSTU ISO 4002-1:2009
Equipment for sowing and planting -- Part 1: Concave disks type D1 -- Dimensions
DSTU ISO 4006:2009
DSTU ISO 4006:2009
Measurement of flow and amount of fluid in closed pipelines. Glossary of terms and designations (ISO 4006: 1991, IDT)
DSTU ISO 4018:2009
DSTU ISO 4018:2009
Hex head screws. Accuracy class C. Technical requirements (ISO 4018: 1999, IDT)
DSTU ISO 4136:2009
DSTU ISO 4136:2009
Destructive tests on welds in metallic materials. Transverse tensile tests
DSTU ISO 4167:2009
DSTU ISO 4167:2009
Polyolefin agricultural twines (ISO 4167:2006, IDT)
DSTU ISO 4250-1:2009
DSTU ISO 4250-1:2009
Tires and rims for earthmoving machines. Part 1. Designations and tire sizes (ISO 4250-1: 2006, IDT)
DSTU ISO 4250-2:2009
DSTU ISO 4250-2:2009
Tires and rims for earthmoving machines. Part 2. load and internal pressure (ISO 4250-2: 2006, IDT)
DSTU ISO 4254-1:2009
DSTU ISO 4254-1:2009
Agricultural machinery -- Safety -- Part 1: General requirements
DSTU ISO 4264:2009
DSTU ISO 4264:2009
Petroleum products -- Calculation of cetane index of middle-distillate fuels by the four-variable equation
DSTU ISO 4294:2009
DSTU ISO 4294:2009
Manganese ores and concentrates; Determination of copper content; Extraction-spectrometric and spectrometric methods (ISO 4294:1984, IDT)
DSTU ISO 4295:2009
DSTU ISO 4295:2009
Manganese ores and concentrates; determination of aluminium content; photometric and gravimetric methods (ISO 4295:1988, IDT)
DSTU ISO 4297:2009
DSTU ISO 4297:2009
Manganese ores and concentrates; Methods of chemical analysis; General instructions (ISO 4297-1978, IDT)
DSTU ISO 433:2009
DSTU ISO 433:2009
Conveyor belts
DSTU ISO 4389:2009
DSTU ISO 4389:2009
Tobacco and tobacco products. - Determination of organochlorine pesticide residues - Gas chromatographic method
DSTU ISO 4491-3:2009
DSTU ISO 4491-3:2009
Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen
DSTU ISO 4492:2009
DSTU ISO 4492:2009
Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering
DSTU ISO 4571:2009
DSTU ISO 4571:2009
Manganese ores and concentrates; Determination of potassium and sodium content; Flame atomic emission spectrometric method (ISO 4571:1981, IDT)
DSTU ISO 4689-3:2009
DSTU ISO 4689-3:2009
Iron ores -- Determination of sulfur content – Part 3: Combustion/infrared method (ISO 4689-3:2004, IDT)
DSTU ISO 4787:2009
DSTU ISO 4787:2009
Laboratory glassware
DSTU ISO 4863:2009
DSTU ISO 4863:2009
Resilient shaft couplings
DSTU ISO 4951-1:2009
DSTU ISO 4951-1:2009
High yield strength steel bars and sections. Part 1. General delivery requirements
DSTU ISO 4951-2:2009
DSTU ISO 4951-2:2009
High yield strength steel bars and sections. Part 2. Delivery conditions for normalized, normalized rolled and as-rolled steels
DSTU ISO 4951-3:2009
DSTU ISO 4951-3:2009
High yield strength steel bars and sections. Part 3. Delivery conditions for thermomechanically-rolled steels
DSTU ISO 4952:2009
DSTU ISO 4952:2009
Structural steels with improved atmospheric corrosion resistance
DSTU ISO 496:2009
DSTU ISO 496:2009
Drive and driven mechanisms. Axle heights (ISO 496: 1973, IDT)
DSTU ISO 4998:2009
DSTU ISO 4998:2009
A carbon steel letter of structural quality with a zinc coating applied by continuous hot dipping. Technical conditions
DSTU ISO 4999:2009
DSTU ISO 4999:2009
Cold-pressed carbon steel letter with a lead-tin coating applied by continuous hot dipping, commercial quality, structural quality and for drawing. Technical specifications
DSTU ISO 5001:2009
DSTU ISO 5001:2009
Cold rolled carbon steel letter for vitreous enameling. Technical conditions
DSTU ISO 5002:2009
DSTU ISO 5002:2009
Hot-rolled carbon steel sheet, cold-pressed with commercial grade electrolytic zinc and stretchable. Specifications
DSTU ISO 5061:2009
DSTU ISO 5061:2009
Animal feeding stuffs -- Determination of castor oil seed husks -- Microscope method
DSTU ISO 5080:2009
DSTU ISO 5080:2009
Sisal agricultural twines (ISO 5080:1994, IDT)
DSTU ISO 5131:2009
DSTU ISO 5131:2009
Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator's position - Survey method (ISO 5131:1996, IDT)
DSTU ISO 5172:2009
DSTU ISO 5172:2009
Manual blowpipes for welding, cutting and heating - Specifications and tests
DSTU ISO 5173:2009
DSTU ISO 5173:2009
Destructive tests on welds in metallic materials -- Bend tests
DSTU ISO 5175:2009
DSTU ISO 5175:2009
Equipment used in gas welding, cutting and allied processes -- Safety devices for fuel gases and oxygen or compressed air -- General specifications, requirements and tests
DSTU ISO 5285:2009
DSTU ISO 5285:2009
Conveyor belts -- Guidelines for storage and handling
DSTU ISO 5294:2009
DSTU ISO 5294:2009
Synchronous belt drives
DSTU ISO 5347-19:2009
DSTU ISO 5347-19:2009
Methods for the calibration of vibration and shock pick-ups

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!