Documents by Year

1970s (1)

1973 (1)

1980s (2)

1990s (2734)

2000s (11200)

2010s (11699)

DSTU

«
1
…
17
18
19
20
21
22
23
…
34
»

DSTU GOST 8.501:2009

State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring instruments of periodical pressure over the range 1-250 MPa at frequencies up to 10 kHz

DSTU GOST 8.502:2009

State system for ensuring the uniformity of measurements. Coating thickness gauges. Verification methods and means

DSTU GOST 8.506:2009

State system for ensuring the uniformity of measurements. Convex spherical mirrors. Measurement technique of curvature radius and local departures of surfaces forms from sphericity by holographic shear interferometry

DSTU GOST 8.511:2009

State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4, 2 to 90 K

DSTU GOST 8.514:2009

State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um

DSTU GOST 8.524:2009

State system for ensuring the uniformity of measurements. Psychrometric tables. Constitution, content, calculating correlations

DSTU GOST 8.533:2009

State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring phase shift angle with in the frequency range from 25, 95 to 37, 50 GHz

DSTU GOST 8.534:2009

State system for ensuring the unification of measurements. State special standard and state verification schdule for means measuring radiation field parameters of antenna systems with aperture dimensions from 5 to 100 m and of the airborne antennas within the frequency range from 0, 3 to 3, 0 GHz

DSTU GOST 8.536:2009

State system for ensuring the uniformity of measurements. State verification schedule for means measuring of the coating thickness in the range of 1 to 20000 um

DSTU GOST 8.537:2009

State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0, 001-1, 000 kg/m2

DSTU GOST 8.539:2009

State system for ensuring the uniformity of measurements. State verification schedule for means measuring photomaterial resolution

DSTU GOST 8.540:2009

State system for ensuring the uniformity of measurements. State verification scheme for means of measuring the maximum values of impulse electric and magnetic fields strengths

DSTU GOST 8.549:2009

The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with unindicated tolerances

DSTU GOST 8.550:2009

State system for ensuring the uniformity of measurements. State special standard and state verification schedul for means of measuring sinusoidal current ratio

DSTU GOST 8.551:2009

State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring electric power and power factor over the frequency range 40-20000 Hz

DSTU GOST 8.586.1:2009 (ISO 5167-1:2003)

Metrology. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the measuring method and general requirements (GOST 8.586.1-2005 (ISO 5167-1:2003). IDT)

DSTU GOST 8.586.2:2009 (ISO 5167-2:2003)

Metrology. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements (GOST 8.586.2-2005 (ISO 5167-2:2003). IDT)

DSTU GOST 8.586.3:2009 (ISO 5167-3:2003)

Metrology. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements (GOST 8.586.3-2005 (ISO 5167-3:2003). IDT)

DSTU GOST 8.586.4:2009 (ISO 5167-4:2003)

Metrology. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements (GOST 8.586.4-2005 (ISO 5167-4:2003). IDT)

DSTU GOST 8.586.5:2009

Measurements. Measurement of flow and quantity of liquid and gas using standard narrowing devices. Part 5. Measurement Technique

DSTU GOST 8.586.5:2009 (GOST 8.586.5–2005, IDT)

State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

DSTU GOST 868:2009

Internal dial gauges graduated in 0, 01 mm. Specifications

DSTU GOST 8691:2009

Refractory products for general use. Shape and size

DSTU GOST 8702:2009

Wallpaper, coloured paper, board and their products. Methods for determination of colour fastness to light under artificial lighting (xenon lamp)

DSTU GOST 8816:2009

Wooden cants for switch assemblies of wide gauge railway. Specifications

DSTU GOST 9031:2009

Standardized blocks of hardness. Specifications

DSTU GOST 9038:2009

Gauge blocks. Specifications

DSTU GOST 9135:2009

Shoes. Method for determination of total and permanent deformation of foot-toe and counter

DSTU GOST 9244:2009

Inside callipers graduated in 0, 001 and 0, 002 mm. Specifications

DSTU GOST 9293:2009

Gaseous and liquid nitrogen. Technical specifications

DSTU GOST 9392:2009

Leveling squares and bars. Specifications

DSTU GOST 9486:2009

Alternating current measuring bridges. General requirements

DSTU GOST 9509:2009

Scales and dosimeters. Knifeedges and bearings of steel. General requirements

DSTU GOST 9569:2009

Paraffined paper. Specifications

DSTU GOST 9736:2009

Electric apparatus of direct transformation for measuring non-electrical values. General technical requirements and methods of tests

DSTU GOST 980:2009

Flat round saws for sawing wood. Technical specifications

DSTU GOST 980:2009(ISO 2935–74)

Flat disk saws for wood sawing. Specifications

DSTU GOST EN 12478:2009

Safety of machine tools - Large numerically controlled turning machines and turning centres

DSTU GOST EN 1760-1:2009

Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

DSTU GOST ISO 11554:2009

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics

DSTU GOST ISO 16902-1:2009

Hydraulic fluid power -- Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method -- Part 1: Pumps

DSTU GOST ISO 7653:2009

DSTU GOST ISO 7919-1:2009

Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Part 1. General guidelines

DSTU GOST ISO 7919-3:2009

Mechanical vibration of non-reciprocating mashines. Measurements on rotating shafts and evaluation criteria. Part 3. Coupled industrial machines

DSTU GOST ISO 7919-4:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings

DSTU GOST ISO 8716:2009

Road vehicles. Fifth wheel kingpins. Strength test

DSTU GOST ISO 8717:2009

Commercial road vehicles

DSTU GOST ISO 8718:2009

Road vehicles. Drawbar couplings and eyes for hinged drawbars. Strength tests

«
1
…
17
18
19
20
21
22
23
…
34
»

All Codes and Regulations

DBN	DSTU	Other UA norms	SOU
DNAOP	MSP	PUE	VBN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Projects of works (PPR) on bridges	Technical Supervision
Construction Price Formation	ISO classifier	Organization Standards	PromExpert	Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Power industry	Standards for pipe fittings (TPA)

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!