Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 13071:2008
DSTU GOST 13071:2008
Carrage holders for nipping laminated wide cutters. Design and dimensions
DSTU GOST 13110:2008
DSTU GOST 13110:2008
Sheet stamping dies. Lower plates-blanks for dies with diagonally positioned guide assemblies. Construction and dimensions
DSTU GOST 13111:2008
DSTU GOST 13111:2008
Sheet stamping dies. Upper plastic-blanks for dies with diagonally positioned guide assemblies. Design and dimensions
DSTU GOST 13112:2008
DSTU GOST 13112:2008
Die bases for cold plastic working dies with guide posts rear located. Construction and dimensions
DSTU GOST 13113:2008
DSTU GOST 13113:2008
Die bases for cold plastic working dies with guide posts located on central line. Construction and dimensions
DSTU GOST 13114:2008
DSTU GOST 13114:2008
Die plate without shelves for cold plastic working dies. Construction and dimensions
DSTU GOST 13115:2008
DSTU GOST 13115:2008
Die plates with shelves located along the width of cold plastic working dies. Construction and dimensions
DSTU GOST 13116:2008
DSTU GOST 13116:2008
Die plates with shelves located along the length of the die plate for cold plastic working dies. Construction and dimensions
DSTU GOST 13118:2008
DSTU GOST 13118:2008
Guide posts smooth for cold plastic working dies. Construction and dimensions
DSTU GOST 13119:2008
DSTU GOST 13119:2008
Die posta with flute for cold plastic working dies. Construction and dimensions
DSTU GOST 13120:2008
DSTU GOST 13120:2008
Guide bushes smooth for cold plastic working dies. Construction and dimensions
DSTU GOST 13121:2008
DSTU GOST 13121:2008
Guide bushes with shoulders for cold plastic working dies. Construction and dimensions
DSTU GOST 13124:2008
DSTU GOST 13124:2008
Diagonal post press tool sets for cold plastic working dies. Construction and dimensions
DSTU GOST 13125:2008
DSTU GOST 13125:2008
Rear post press tool sets for cold plastic working dies. Construction and dimensions
DSTU GOST 13126:2008
DSTU GOST 13126:2008
Centre post press tool sets for cold plastic working dies. Construction and dimensions
DSTU GOST 13152:2008
DSTU GOST 13152:2008
Bolts for machine slots. Design and dimensions
DSTU GOST 13153:2008
DSTU GOST 13153:2008
Wedge clamps. Design and dimensions
DSTU GOST 13154:2008
DSTU GOST 13154:2008
Floating clamps for machine retaining devices. Design and dimensions
DSTU GOST 13155:2008
DSTU GOST 13155:2008
Bushes of tangential clamp for machine retaining devices. Design and dimensions
DSTU GOST 13156:2008
DSTU GOST 13156:2008
Bushes of tangential clamps with thread hole for machine retaining devices. Design and dimensions
DSTU GOST 13157:2008
DSTU GOST 13157:2008
Cone bushes for indexes of machine retaining devices. Design and dimensions
DSTU GOST 13158:2008
DSTU GOST 13158:2008
Screw sprags built-in for machine retaining devices. Design and dimensions
DSTU GOST 13159:2008
DSTU GOST 13159:2008
Adjustable jacks for machine retaining devices. Design and dimensions
DSTU GOST 13160:2008
DSTU GOST 13160:2008
Fixing devices with retractable handle for machine retaining devices. Design and dimensions
DSTU GOST 13161:2008
DSTU GOST 13161:2008
Bayonet type indexes for machine retaining devices. Design and dimensions
DSTU GOST 13162:2008
DSTU GOST 13162:2008
Rack type indexes for machine retaining devices. Design and dimensions
DSTU GOST 13163:2008
DSTU GOST 13163:2008
Rack type clips with tapered lock for machine retaining devices. Design and dimensions
DSTU GOST 13164:2008
DSTU GOST 13164:2008
Pawls for drop plates of machine retaining devices. Design and dimensions
DSTU GOST 13165:2008
DSTU GOST 13165:2008
Compression springs for machine retaining devices. Design and dimensions
DSTU GOST 13214:2008
DSTU GOST 13214:2008
Thrust centers. Design
DSTU GOST 13218.1:2008
DSTU GOST 13218.1:2008
Pillow blocks of series ШМ for rolling bearings of diameters from 47 till 150 mm. Construction and dimensions
DSTU GOST 13218.10:2008
DSTU GOST 13218.10:2008
Pillow blocks of series РУ for rolling bearings. Construction and dimensions
DSTU GOST 13218.2:2008
DSTU GOST 13218.2:2008
Pillow blocks of series ШМ for rollings of diameters from 160 till 400 mm. Construction and dimensions
DSTU GOST 13218.3:2008
DSTU GOST 13218.3:2008
Pillow blocks of series УМ for rollings of diameters from 80 till 150 mm. Construction and dimensions
DSTU GOST 13218.4:2008
DSTU GOST 13218.4:2008
Pillow blocks blocks of series УМ for rolling bearings of diameters from 160 till 400 mm. Construction and dimensions
DSTU GOST 13218.5:2008
DSTU GOST 13218.5:2008
Pillow blocks of series ШБ for rolling bearings of diameters from 90 till 150 mm. Construction and dimensions
DSTU GOST 13218.6:2008
DSTU GOST 13218.6:2008
Pillow blocks of series Шm for rolling bearings of diameters from 160 till 400 mm. Construction and dimensions
DSTU GOST 13218.7:2008
DSTU GOST 13218.7:2008
Pillow blocks of series УБ for rolling bearings of diameters from 85 till 150 mm. Construction and dimensions
DSTU GOST 13218.8:2008
DSTU GOST 13218.8:2008
Pillow blocks of series УБ for rolling bearings of diameters from 160 till 400 mm. Basic dimensions
DSTU GOST 13218.9:2008
DSTU GOST 13218.9:2008
Pillow blocks of series РШ for rolling bearings. Construction and dimensions
DSTU GOST 13219.1:2008
DSTU GOST 13219.1:2008
Low vague end cups for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.10:2008
DSTU GOST 13219.10:2008
High cups with cup seal for diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.11:2008
DSTU GOST 13219.11:2008
Low cups with grooves for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.12:2008
DSTU GOST 13219.12:2008
Low cups with grooves for fat, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.13:2008
DSTU GOST 13219.13:2008
Medium cups with grooves for diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.14:2008
DSTU GOST 13219.14:2008
Medium cups with grooves for fat, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.15:2008
DSTU GOST 13219.15:2008
High cups with grooves for fat, diameters from 47 till 100 mm of pillow blocks. Construction and dimensions
DSTU GOST 13219.16:2008
DSTU GOST 13219.16:2008
High cups with grooves for, diameters from 110 till 400 mm of pillow blocks. Construction and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!