Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 1293.0:2008
DSTU GOST 1293.0:2008
Lead-antimony alloys. General requirements for methods of chemical analysis
DSTU GOST 12937:2008
DSTU GOST 12937:2008
Moveable flat grippers for machine retaining devices. Design and dimensions
DSTU GOST 12938:2008
DSTU GOST 12938:2008
Moveable bent gripper for machine retaining devices. Design and dimensions
DSTU GOST 12939:2008
DSTU GOST 12939:2008
Moveable stepped gripper for machine retaining devices. Design and dimensions
DSTU GOST 12940:2008
DSTU GOST 12940:2008
Moveable fork grippers for machine retaining devices. Design and dimensions
DSTU GOST 12941:2008
DSTU GOST 12941:2008
Bent clamps for machine retaining devices. Design and dimensions
DSTU GOST 12942:2008
DSTU GOST 12942:2008
Universal bent clamps for machine retaining devices. Design and dimensions
DSTU GOST 12943:2008
DSTU GOST 12943:2008
Washers for machine retaining device. Design and dimensions
DSTU GOST 12944:2008
DSTU GOST 12944:2008
Equal-angle for clamping of machine retaining devices. Design and dimensions
DSTU GOST 12945:2008
DSTU GOST 12945:2008
Unequal angle plates for machine retaining devices. Design and dimensions
DSTU GOST 12946:2008
DSTU GOST 12946:2008
Overhead collar nut for machine retaining devices. Design and dimensions
DSTU GOST 12947:2008
DSTU GOST 12947:2008
Steel plates for machine retaining devices. Design and dimensions
DSTU GOST 12948:2008
DSTU GOST 12948:2008
Cast iron plates for machine retaining devices. Design and dimensions
DSTU GOST 12949:2008
DSTU GOST 12949:2008
Boxes for machine retaining devices. Design and dimensions
DSTU GOST 12950:2008
DSTU GOST 12950:2008
Channels for machine retaining devices. Design and dimensions
DSTU GOST 12951:2008
DSTU GOST 12951:2008
Angle plates for machine retaining devices. Design and dimensions
DSTU GOST 12952:2008
DSTU GOST 12952:2008
Ribbed angle plates for machine retaining devices. Design and dimensions
DSTU GOST 12953:2008
DSTU GOST 12953:2008
Trihedrons for machine retaining devices. Design and dimensions
DSTU GOST 12954:2008
DSTU GOST 12954:2008
Tetragons for machine retaining devices. Design and dimensions
DSTU GOST 12955:2008
DSTU GOST 12955:2008
Right ribs for machine retaining devices. Design and dimensions
DSTU GOST 12956:2008
DSTU GOST 12956:2008
Left ribs for machine retaining devices. Design and dimensions
DSTU GOST 12957:2008
DSTU GOST 12957:2008
Right side ribs for machine retaining devices. Design
DSTU GOST 12958:2008
DSTU GOST 12958:2008
Left side ribs for machine retaining devices. Design and dimensions
DSTU GOST 12959:2008
DSTU GOST 12959:2008
Double sided right ribs for machine retaining devices. Design and dimensions
DSTU GOST 12960:2008
DSTU GOST 12960:2008
Double-sided left ribs for machine retaining devices. Design and dimensions
DSTU GOST 12961:2008
DSTU GOST 12961:2008
Claws for machine retaining devices. Design and dimensions
DSTU GOST 13012:2008
DSTU GOST 13012:2008
Examiners with limb reading. Methods and means of verification
DSTU GOST 13014:2008
DSTU GOST 13014:2008
Clamping sleeves of rolling bearings. Basic dimensions
DSTU GOST 13038:2008
DSTU GOST 13038:2008
Arbor dogs for cutters with face key. Basic dimensions
DSTU GOST 13039:2008
DSTU GOST 13039:2008
Arbor screws for fixing end cutters. Basic dimensions
DSTU GOST 13040:2008
DSTU GOST 13040:2008
Round nuts for tool holders. Dimensions
DSTU GOST 13041:2008
DSTU GOST 13041:2008
Arbors with face key and taper claw shank for end cutters. Basic dimensions
DSTU GOST 13042:2008
DSTU GOST 13042:2008
Arbors with longitudinal key and tapes claw-ended shank for end cutters. Design and dimensions
DSTU GOST 13043:2008
DSTU GOST 13043:2008
Arbors spot facers and reamers. Design and dimensions
DSTU GOST 13044:2008
DSTU GOST 13044:2008
Arbors for shell multi-flute drills and reamers. Construction and dimensions
DSTU GOST 13058:2008
DSTU GOST 13058:2008
Holders for disk cutters to lathes. Design and dimensions
DSTU GOST 13059:2008
DSTU GOST 13059:2008
Holders for disk cutters with self-adjustments to lathe. Design and dimensions
DSTU GOST 13060:2008
DSTU GOST 13060:2008
Axles for accessory tools. Design and dimensions
DSTU GOST 13061:2008
DSTU GOST 13061:2008
Rings for accessory tools. Design and dimensions
DSTU GOST 13062:2008
DSTU GOST 13062:2008
Carrage single-rolled holders for knurling. Design and dimensions
DSTU GOST 13063:2008
DSTU GOST 13063:2008
Carrage holders double-rolled for net knurling. Design and dimension
DSTU GOST 13064:2008
DSTU GOST 13064:2008
Carrage holders straight for bar cutters. Design and dimensions
DSTU GOST 13065:2008
DSTU GOST 13065:2008
Carrage holders bent for bar cutters, left and right. Design and dimensions
DSTU GOST 13066:2008
DSTU GOST 13066:2008
Carrage holder with skew fastening of bar cutters, open. Design and dimensions
DSTU GOST 13067:2008
DSTU GOST 13067:2008
Carrage holder with cross fastening of bar cutters, open. Design and dimensions
DSTU GOST 13068:2008
DSTU GOST 13068:2008
Carrage holder with cross fastening of bar cutters closed. Design and dimensions
DSTU GOST 13069:2008
DSTU GOST 13069:2008
Carrage holders boring with straight fastening of a cutter. Design and dimensions
DSTU GOST 13070:2008
DSTU GOST 13070:2008
Carrage holders boring with skew fastening of a cutter. Design and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!