Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU ETSI EG 201 188: 2008
DSTU ETSI EG 201 188: 2008
Public telephone network. The interface of the network termination point for subscriber lines of small and medium length is analog two-wire. Physical and electrical specifications (ETSI EG 201 188: 2000, IDT)
DSTU ETSI EG 202 057-2:2008
DSTU ETSI EG 202 057-2:2008
Telecommunication networks. Aspects of processing, transmitting voice information signals and ensuring their quality. Determination and measurement of parameters of quality of services that are important for consumers. Part 2. Voice telephony, group 3 fax and data and short message (SMS) services using a modem (ETSI EG 202057-2: 2005, IDT)
DSTU ETSI EN 300 328:2008
DSTU ETSI EN 300 328:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2, 4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
DSTU ETSI EN 300 418:2008
DSTU ETSI EN 300 418:2008
Access and Terminals (AT)
DSTU ETSI EN 300 419:2008
DSTU ETSI EN 300 419:2008
Access and final equipment. Digital structured leased lines with a speed of 2048 kbps. Characteristics of connections (ETSI EN 300419: 2001, IDT)
DSTU ETSI EN 300 420:2008
DSTU ETSI EN 300 420:2008
Access and final equipment. Digital structured leased lines with a speed of 2048 kbps. Terminal Equipment Interface (ETSI EN 300420: 2001, IDT)
DSTU ETSI EN 300 462-4-2:2008
DSTU ETSI EN 300 462-4-2:2008
Digital telecommunication networks. Characteristics of slave devices for synchronizing synchronization sources of a synchronous digital hierarchy and plesiochronous digital hierarchy. Requirements for the declaration of conformity form of declared equipment (ETSI EN 300462-4-2 1999, IDT)
DSTU ETSI EN 301 360:2008
DSTU ETSI EN 301 360:2008
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27, 5 GHz to 29, 5 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive
DSTU ETSI EN 301 401:2008
DSTU ETSI EN 301 401:2008
Attachment requirements for Data Terminal Equipment (DTE) to connect to public networks that have physical and electrical network presentations based upon the ITU-T V-series of Recommendations
DSTU ETSI EN 301 459:2008
DSTU ETSI EN 301 459:2008
Satellite earth stations and systems. Satellite terminals in the frequency range from 29.5 GHz to 30.0 GHz. Technical requirements and test methods (ETSI EN 301 459: 2007, IDT)
DSTU ETSI EN 301 489-1:2008
DSTU ETSI EN 301 489-1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM)
DSTU ETSI EN 301 489-12: 2008
DSTU ETSI EN 301 489-12: 2008
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) (ETSІ EN 301 489-12:2003, ІDT)
DSTU ETSI EN 301 489-17: 2008
DSTU ETSI EN 301 489-17: 2008
Electromagnetic compatibility and Radio spectrum Matters (ERM)
DSTU ETSI EN 301 489-19: 2008
DSTU ETSI EN 301 489-19: 2008
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1, 5 GHz band providing data communications (ETSІ EN 301 489-19:2002, ІDT)
DSTU ETSI EN 301 489-6:2008
DSTU ETSI EN 301 489-6:2008
Electromagnetic compatibility of radio equipment and radio services. Part 6. Special conditions for testing equipment of the Digital Advanced Wireless Access System (DECT) (ETSI EN 301489-6: 2002, IDT)
DSTU ETSI EN 301 489-7:2008
DSTU ETSI EN 301 489-7:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) (ETSІ EN 301 489-7:2002, ІDT)
DSTU ETSI EN 301 489-8:2008
DSTU ETSI EN 301 489-8:2008
Electromagnetic compatibility of radio equipment and radio services. Part 8. Special conditions for testing base stations of the GSM standard (ETSI EN 301489-8: 2002, IDT)
DSTU ETSI EN 301489-19:2008
DSTU ETSI EN 301489-19:2008
Electromagnetic compatibility of radio equipment and radio services. Part 19. Special conditions for testing receiving mobile digital earth stations in the 1.5 GHz frequency band (ETSI EN 30489-19: 2002, IDT)
DSTU ETSI EN 302 296:2008
DSTU ETSI EN 302 296:2008
Digital television broadcasting. Electromagnetic compatibility and radio spectrum. Radio transmission equipment of terrestrial broadcasting service. General technical requirements (ETSI EN 302296: 2005, IDT)
DSTU ETSI ES 201 671:2008
DSTU ETSI ES 201 671:2008
Lawful Interception (LI)
DSTU ETSI ES 202 913:2008
DSTU ETSI ES 202 913:2008
Access and terminal equipment. Requirements for asymmetric digital subscriber line modems of a simple traditional telephone system connected to an existing analogue public switched telephone network line (ETSI EN 202 913: 2006, IDT)
DSTU ETSI ES 203 021-1:2008
DSTU ETSI ES 203 021-1:2008
Access and terminal equipment. Basic requirements for connecting terminal equipment to the analog junction of telephone networks. Part 1. General Provisions (ETSI ES 203021-1: 2005, IDT)
DSTU ETSI ES 203 021-3.2008
DSTU ETSI ES 203 021-3.2008
Access and Terminals (AT); Harmonized basic attachment requirements for Terminals for connection to analogue interfaces of the Telephone Networks; Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017; Part 3: Basic Interworking with the Public Telephone Networks
DSTU ETSI ES 203021-2:2008
DSTU ETSI ES 203021-2:2008
Access and Terminals (AT); Harmonized basic attachment requirements for Terminals for connection to analogue interfaces of the Telephone Networks; Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017; Part 2: Basic transmission and protection of the network from harm
DSTU ETSI ES 203021-3:2008
DSTU ETSI ES 203021-3:2008
Access and final equipment. Basic requirements in terms of connecting the terminal equipment to the analog joints of telephone networks Part 3. Basics of interaction with public telephone networks (ETSI ES 203021-3: 2006, IDT)
DSTU ETSI TR 101 190:2008
DSTU ETSI TR 101 190:2008
Digital television broadcasting. Principles for the construction of terrestrial broadcasting distribution systems (ETSI TR 101190: 2004, IDT)
DSTU GOST 10044:2008
DSTU GOST 10044:2008
High-speed steel boring tools with holders. Design and dimensions
DSTU GOST 10046:2008
DSTU GOST 10046:2008
High speed steel slotting. Types and basic dimensions
DSTU GOST 10079:2008
DSTU GOST 10079:2008
Tapered reamers with taper shank for Morse tapers. Design and dimensions
DSTU GOST 10080:2008
DSTU GOST 10080:2008
Tertic taper reamers with 1:20 with tapered shank. Design and dimensions
DSTU GOST 10081:2008
DSTU GOST 10081:2008
Machine tapered reamers, taper 1:50. Basic dimensions
DSTU GOST 10082:2008
DSTU GOST 10082:2008
Taper reamers with taper 1:30 with tapered shank. Design and dimensions
DSTU GOST 10213.0:2008
DSTU GOST 10213.0:2008
Staple chemical fiber and tow. Rules of acceptance and method of sampling
DSTU GOST 10213.1:2008
DSTU GOST 10213.1:2008
Staple chemical fiber and tow. Linear density test methods
DSTU GOST 10213.2:2008
DSTU GOST 10213.2:2008
Staple chemical fiber and tow. Methods for determination of breaking strength and breaking elongation
DSTU GOST 10213.3:2008
DSTU GOST 10213.3:2008
Staple chemical fiber and tow. Moisture test methods
DSTU GOST 10213.4:2008
DSTU GOST 10213.4:2008
Chemical staple fiber and tow. Methods of length determination
DSTU GOST 10213.5:2008
DSTU GOST 10213.5:2008
Staple chemical fiber and tow. Defects test methods
DSTU GOST 10284:2008
DSTU GOST 10284:2008
Inserts-blanks of sintered carbide alloys for upsetting tool. Shapes and dimensions
DSTU GOST 10287:2008
DSTU GOST 10287:2008
Direct current meters. General specifications
DSTU GOST 10336:2008
DSTU GOST 10336:2008
Cheese-head non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10337:2008
DSTU GOST 10337:2008
Raised cheese-head non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10338:2008
DSTU GOST 10338:2008
Hexagon-head non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10339:2008
DSTU GOST 10339:2008
Countersunk non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10340:2008
DSTU GOST 10340:2008
Raised countersunk head non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10341:2008
DSTU GOST 10341:2008
Mushroom-head non-falling-out screws, product grade B. Design and dimensions
DSTU GOST 10342:2008
DSTU GOST 10342:2008
Cheese-head non-falling-out screws with hexagon socket for "width across flats", product grade B. Design and dimensions
DSTU GOST 10343:2008
DSTU GOST 10343:2008
Non-falling-out screws with flat for "width across flats", product grade B. Design and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!