Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 24247:2008
DSTU GOST 24247:2008
Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces. Design and dimensions
DSTU GOST 24248:2008
DSTU GOST 24248:2008
Square throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on both faces. Design and dimensions
DSTU GOST 24249:2008
DSTU GOST 24249:2008
Rhombic throw-away (indexable) carbide cutting inserts with 80° included angle, with cylindrical holes and chip-breaking flutes on both faces. Design and dimensions
DSTU GOST 24250:2008
DSTU GOST 24250:2008
Triangular throw-away (indexable) carbide cutting inserts with end-clearance angle and chip-breaking flutes. Design and dimensions
DSTU GOST 24251:2008
DSTU GOST 24251:2008
Triangular throw-away (indexable) carbide cutting inserts with 20° end-clearance angle. Design and dimensions
DSTU GOST 24252:2008
DSTU GOST 24252:2008
Square throw-away (indexable) carbide cutting inserts with end-clearance angle and chip-breaking flutes. Design and dimensions
DSTU GOST 24253:2008
DSTU GOST 24253:2008
Square throw-away (indexable) carbide cutting inserts with 20° end-clearance angle. Design and dimensions
DSTU GOST 24254:2008
DSTU GOST 24254:2008
Rhombic throw-away (indexable) carbide shims with 55° included angle. Design and dimensions
DSTU GOST 24255:2008
DSTU GOST 24255:2008
Rhombic throw-away (indexable) carbide cutting inserts with 55° included angle and cylindrical holes. Design and dimensions
DSTU GOST 24256:2008
DSTU GOST 24256:2008
Rhombic throw-away (indexable) carbide cutting inserts with 55° included angle, with cylindrical holes and chip-breaking flutes on one face only. Design and dimensions
DSTU GOST 24257:2008
DSTU GOST 24257:2008
Rhombic throw-away (indexable) carbide cutting inserts with 55° included angle, with cylindrical holes and chip-breaking flutes on both faces. Design and dimensions
DSTU GOST 24351:2008
DSTU GOST 24351:2008
Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions
DSTU GOST 24359:2008
DSTU GOST 24359:2008
Sheel and mills with inserted carbide teeth. Construction and dimensions
DSTU GOST 24372:2008
DSTU GOST 24372:2008
Hand operated socket wrenches with detachable heads. Connecting internal and external squares. Dimensions
DSTU GOST 24379.1:2008
DSTU GOST 24379.1:2008
Foundation bolts. Design and dimensions
DSTU GOST 24388:2008
DSTU GOST 24388:2008
Domestic sound frequency signal amplifiers. General specifications
DSTU GOST 24485:2008
DSTU GOST 24485:2008
Passage tube connections with ball nipple. Construction
DSTU GOST 24486:2008
DSTU GOST 24486:2008
Reducing tube connections with ball nipple. Construction
DSTU GOST 24487:2008
DSTU GOST 24487:2008
Welding passage tube connections with ball nipple. Construction
DSTU GOST 24488:2008
DSTU GOST 24488:2008
End tube connections with ball nipple. Construction
DSTU GOST 24489:2008
DSTU GOST 24489:2008
Elbow passage tube connections with ball nipple. Construction
DSTU GOST 24492:2008
DSTU GOST 24492:2008
Tee passage connections with ball nipple. Construction
DSTU GOST 24493:2008
DSTU GOST 24493:2008
Tee reducing tube connections with ball nipple. Construction
DSTU GOST 24499:2008
DSTU GOST 24499:2008
Cross passage tube connections with ball nipple. Construction
DSTU GOST 24502:2008
DSTU GOST 24502:2008
Partition tube connections with ball nipple. Construction
DSTU GOST 24503:2008
DSTU GOST 24503:2008
Dead tube connections with ball nipple. Construction
DSTU GOST 24504:2008
DSTU GOST 24504:2008
Tube connections. End unions for cutting ring. Construction
DSTU GOST 24505:2008
DSTU GOST 24505:2008
Numerical control units. Symbols for control panels
DSTU GOST 24526:2008
DSTU GOST 24526:2008
Sections for female dies (punches) with pin plug. Design and dimensions
DSTU GOST 24527:2008
DSTU GOST 24527:2008
Pin plugs. Design and dimensions
DSTU GOST 24528:2008
DSTU GOST 24528:2008
Flanged overrunning stop cutting blades. Design and dimensions
DSTU GOST 24529:2008
DSTU GOST 24529:2008
Flanged overrunning stop cutting blades with lugs. Design and dimensions
DSTU GOST 24530:2008
DSTU GOST 24530:2008
Racing pivot stops. Design and dimensions
DSTU GOST 24531:2008
DSTU GOST 24531:2008
Wedge holder. Design and dimensions
DSTU GOST 24532:2008
DSTU GOST 24532:2008
Unstuckers. Design and dimensions
DSTU GOST 24533:2008
DSTU GOST 24533:2008
Pin-hole punches. Design and dimensions
DSTU GOST 24534:2008
DSTU GOST 24534:2008
Bushes for pin-hole punches. Design and dimensions
DSTU GOST 24535:2008
DSTU GOST 24535:2008
Stepped bushes for composite springs. Design and dimensions
DSTU GOST 24536:2008
DSTU GOST 24536:2008
Rod stops. Design and dimensions
DSTU GOST 24537:2008
DSTU GOST 24537:2008
Protective housings. Design and dimensions
DSTU GOST 24538:2008
DSTU GOST 24538:2008
Telescopic protective housings. Design and dimensions
DSTU GOST 24539:2008
DSTU GOST 24539:2008
Quick changeable telescopic protective housings. Design and dimensions
DSTU GOST 24540:2008
DSTU GOST 24540:2008
Connection strips. Design and dimensions
DSTU GOST 24541:2008
DSTU GOST 24541:2008
Locks of removable die parts. Design and dimensions
DSTU GOST 24542:2008
DSTU GOST 24542:2008
Handling dowels for pouring. Design and dimensions
DSTU GOST 24543:2008
DSTU GOST 24543:2008
Journal with 49000 N (5000 Kgf) loadcarrying capacity. Design and dimensions
DSTU GOST 24558:2008
DSTU GOST 24558:2008
Sheet stamping dies. Guide bushes for guide posts with flute. Design and dimensions
DSTU GOST 24559:2008
DSTU GOST 24559:2008
Sheet stamping dies. Check spring rings. Design and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!