Documents by Year
1970s (1)
1980s (2)
1990s (2734)
2000s (11200)
2010s (11699)
Other (9)

DSTU

DSTU GOST 18718:2008
DSTU GOST 18718:2008
Guide posts for changeable sheet stamping dies. Construction and dimensions
DSTU GOST 18719:2008
DSTU GOST 18719:2008
Guide posts with shoulders for changeable sheet stamping dies. Construction and dimensions
DSTU GOST 18732:2008
DSTU GOST 18732:2008
Sections for female dies (punches). Design and dimensions
DSTU GOST 18733:2008
DSTU GOST 18733:2008
Stop keys. Design and dimensions
DSTU GOST 18734:2008
DSTU GOST 18734:2008
Scrap cutters. Design and dimensions
DSTU GOST 18735:2008
DSTU GOST 18735:2008
Rectangular scrap cutters. Design and dimensions
DSTU GOST 18736:2008
DSTU GOST 18736:2008
Overrunning stop cutting blades. Design and dimensions
DSTU GOST 18737:2008
DSTU GOST 18737:2008
Overrunning stop cutting blades with lugs. Design and dimensions
DSTU GOST 18738:2008
DSTU GOST 18738:2008
Stops for overrunning stop cutting blades. Design and dimensions
DSTU GOST 18740:2008
DSTU GOST 18740:2008
Cylindrical stops. Design and dimensions
DSTU GOST 18741:2008
DSTU GOST 18741:2008
Expendable stops with a nest for spring. Design and dimensions
DSTU GOST 18742:2008
DSTU GOST 18742:2008
Expendable stops. Design and dimensions
DSTU GOST 18743:2008
DSTU GOST 18743:2008
Mushroom-shaped stops. Design and dimensions
DSTU GOST 18744:2008
DSTU GOST 18744:2008
Revelled stops. Design and dimensions
DSTU GOST 18745:2008
DSTU GOST 18745:2008
Hook stops. Design and dimensions
DSTU GOST 18746:2008
DSTU GOST 18746:2008
Backing dowel pins. Design and dimensions
DSTU GOST 18747:2008
DSTU GOST 18747:2008
Stepped countersunk stops. Design and dimensions
DSTU GOST 18748:2008
DSTU GOST 18748:2008
Stepped countersunk stops with a plate. Design and dimensions
DSTU GOST 18750:2008
DSTU GOST 18750:2008
Countersunk stops with a twist spring hole. Design and dimensions
DSTU GOST 18751:2008
DSTU GOST 18751:2008
Twist springs for stops. Design and dimensions
DSTU GOST 18752:2008
DSTU GOST 18752:2008
Stops with chamfer and notch for spring. Design and dimensions
DSTU GOST 18753:2008
DSTU GOST 18753:2008
Blade spring for stops with chamfer. Design and dimensions
DSTU GOST 18754:2008
DSTU GOST 18754:2008
Stops with chamfer and flat. Design and dimensions
DSTU GOST 18755:2008
DSTU GOST 18755:2008
Wire stops. Design and dimensions
DSTU GOST 18756:2008
DSTU GOST 18756:2008
Stops for turned back strip fixing. Design and dimensions
DSTU GOST 18757:2008
DSTU GOST 18757:2008
Composite stops for turned back strip fixing. Design and dimensions
DSTU GOST 18758:2008
DSTU GOST 18758:2008
Blank holders. Design and dimensions
DSTU GOST 18759:2008
DSTU GOST 18759:2008
Roll holders. Design and dimensions
DSTU GOST 18760:2008
DSTU GOST 18760:2008
Rollers for blank holders. Design and dimensions
DSTU GOST 18761:2008
DSTU GOST 18761:2008
Cylindrical blank holders. Design and dimensions
DSTU GOST 18762:2008
DSTU GOST 18762:2008
Slide blocks for cylinder holders. Design and dimensions
DSTU GOST 18763:2008
DSTU GOST 18763:2008
Block blank holders. Design and dimensions
DSTU GOST 18764:2008
DSTU GOST 18764:2008
Blade springs for block blank holders. Design and dimensions
DSTU GOST 18765:2008
DSTU GOST 18765:2008
Spring blank holders. Design and dimensions
DSTU GOST 18767:2008
DSTU GOST 18767:2008
Holding down devices. Design and dimensions
DSTU GOST 18768:2008
DSTU GOST 18768:2008
Supporting strips. Design and dimensions
DSTU GOST 18769:2008
DSTU GOST 18769:2008
Rod locators. Design and dimensions
DSTU GOST 18770:2008
DSTU GOST 18770:2008
Locators with threaded bore. Design and dimensions
DSTU GOST 18771:2008
DSTU GOST 18771:2008
Locators with a stepped bore. Design and dimensions
DSTU GOST 18773:2008
DSTU GOST 18773:2008
Extended rod locators. Design and dimensions
DSTU GOST 18775:2008
DSTU GOST 18775:2008
Reinforced locators. Design and dimensions
DSTU GOST 18776:2008
DSTU GOST 18776:2008
Mushroom-shaped locators. Design and dimensions
DSTU GOST 18777:2008
DSTU GOST 18777:2008
Round cross-bars. Design and dimensions
DSTU GOST 18778:2008
DSTU GOST 18778:2008
Three-support cross-bars. Design and dimensions
DSTU GOST 18779:2008
DSTU GOST 18779:2008
Four-support cross-bars. Design and dimensions
DSTU GOST 18780:2008
DSTU GOST 18780:2008
Puchers. Design and dimensions
DSTU GOST 18782:2008
DSTU GOST 18782:2008
Pins for pushers. Design and dimensions
DSTU GOST 18783:2008
DSTU GOST 18783:2008
Guide bushes for pushers. Design and dimensions

All Codes and Regulations

DBN DSTU Other UA norms SOU
DNAOP MSP PUE VBN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!